- Edision

11.7 Miscellaneous Settings

When you enter to “Miscellaneous Settings” menu, you will see a screen like below:

11.8 Software Upgrade

1 Subtitle Auto: You can press [Left/Right] key to select “On” or “Off”. If the current channel has subtitle information, it will be showed up automatically while this function is “ON”, if this function is “OFF”, you need turn on the subtitle manually by press [Yellow] key.

2 Auto Power Down: You can press [Left/Right] key to select the time or “Off”, if you select time, duration this time if no any operation on receiver, it will go to standby mode.

3 Standby mode: if set to “Real”, Press power key receiver will be in real standby status, the consumption will be less than 0.5 Watt. If it’s set to

“Fake”, Press power key, receiver will be in fake standby status.

4 OSD Timeout: When you switch channels in full screen, there will show up some information about current channel on the lower of the screen. And regarding to the duration of these information show up on the screen, you can press [OK] and

[up/ down] key to set the time. The range of the duration is “1 second ~ 10 seconds”.

5 OSD Position: control display position of the info bar in full screen mode. You can choose “bottom” or “top”.

11.8.1 Upgrade By USB

In this menu you can upgrade the software from USB conveniently, Press “Left/Right” button select USB A or

USB B; press ' OK ' button to enter.

In this menu you can select the Upgrade Mode among

Software(No channel list), Channel list, All

SW+bootloader and All SW+Channel list, and you can select the appropriate upgrade file on "Upgrade File" item. After you select the "Upgrade Mode" and "Upgrade

File", press ' OK ' button on "Start" item, the receiver can upgrade automaticlly.

Note:

You must put the upgrade file on the /ROOT

DIRECTORY of the USB storage.

11.8.2 Http Upgrade

23