installation manual

Hardware installation – Windows 2000

Figure 5.4-7: Bluetooth Settings – CANblue device

It’s not necessary to connect the CANblue device via the context menu, because the connection is made automatically.

5.4.2 Installation of CANblue

(1)

Start the IXXAT Interfaces Applet in the Control Panel.

Figure 5.4-8: Starting the IXXAT Interfaces Applet

(2)

Click on the “Install” button in the applet in order to install new hardware.

(3)

A CANblue installation dialog appears after selecting “IXXAT CANblue Install”.

Copyright IXXAT Automation GmbH

24

VCI-V2 Installation Manual V2.16

Hardware installation – Windows 2000

Figure 5.4-9: Installation of CANblue

(4)

Select the previously configured COM port (here COM 40), adjust to the highest baud rate supported by your Bluetooth stack (for the Toshiba stack set 921,6 kBaud) and close the dialog with “OK”.

(5)

The configured CANblue device now appears in the main window of the IXXAT

Interfaces Applet. If the configured COM port is correct the access test via the “Test” button can be performed.

Figure 5.4-10: Applet after installation of the CANblue interface

Copyright IXXAT Automation GmbH

25

VCI-V2 Installation Manual V2.16