advertisement
Apogee Astronomy
Alta and Ascent Manual
SECTION 1: INTRODUCTION
Thank you and congratulations for purchasing your Apogee camera. This Owner's Operating Manual will help you discover, install and use your Apogee camera with the Microsoft Windows family of operating systems.
Apogee USB camera systems are supported by the Windows XP 32 bit, Vista 32 and 64 bit and Windows 7
32 and 64 bit operating systems.
1.1 Help and Technical Support
If you have any questions regarding the use of this equipment, please contact the representative from whom your system was purchased, or:
Europe
Andor Technology
7 Millennium Way
Springvale Business Park
Belfast
BT12 7AL
Northern Ireland
USA
Andor Technology
425 Sullivan Avenue
Suite # 3
South Windsor
CT 06074
USA
Tel. +44 (0) 28 9023 7126
Fax. +44 (0) 28 9031 0792
Asia-Pacific
Andor Technology (Japan)
Andor Technology (Japan)
IS Building
3-32-42 Higashi-Shinagawa
Shinagawa-ku,
Tokyo 140-0002
Japan
Tel: +81-3-6732-8968
Fax: +81-3-6732-8939
Tel. (860) 290-9211
Fax. (860) 290-9566
China
Andor Technology
Unit 1, Building A,
No. 66 Zhufang Road,
Haidian District,
Beijing, 100085 P.R.
China
Tel: +86 (0)10 8271 9066
Fax. +86(0)10-8271 9055
Version 1.2 rev 02 Sep
2015 7
Apogee Astronomy
Alta and Ascent Manual
1.2 Disclaimer
Andor Technology assumes no liability for the use of the information contained in this document or the software which it describes. The user assumes all risks. There is no warranty of fitness for a particular purpose, either express or implied.
The information contained in this document is assumed to be correct, but in no event shall Andor
Technology be held responsible for typographical errors or changes in the software not reflected in this document.
The specifications contained in this document are subject to change without notice.
Any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
If you require further information about this unit, you may contact your local representative. The latest contact details for your local representative may be found at our website: www.andor.com
1.3 Trademarks and Patent Information
Andor
®
, the Andor logo and Solis are trademarks of Andor. Andor is an Oxfords Instruments company. All other marks are property of their owners. The section “Controlling your Apogee Camera using MaxIm
DL/CCD” contains copyright material by Diffraction Limited.
All other trademarks mentioned in this document are the property of their respective owners, and are used herein solely for informational purposes only.
Version 1.2 rev 02 Sep
2015 8
Apogee Astronomy
Alta and Ascent Manual
1.4 About Apogee
Apogee Imaging Systems started up in 1993 in Tucson, Arizona. The small company relocated to Northern
California in 2001. In October 2013, Apogee was acquired by Andor Technology, an Oxford Instruments company, with the Apogee Alta, Ascent and Aspen becoming a dedicated Apogee Camera Product Range.
Apogee cameras have been used for high-end astronomical applications like capturing the first images of optical counterparts of gamma ray bursts, plus thousands of discoveries of comets, near-Earth asteroids and extra-solar planets. The Apogee range of cameras will always be on the brink of discovery with the latest cutting edge technology.
Solar flare taken by NASA with an Apogee Hi-C Camera
Version 1.2 rev 02 Sep
2015 9
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Safety and Warning Information
- 7 SECTION 1: INTRODUCTION
- 7 1.1 Help and Technical Support
- 8 1.2 Disclaimer
- 8 1.3 Trademarks and Patent Information
- 9 1.4 About Apogee
- 10 SECTION 2: INSTALLATION
- 10 2.1 Installation Summary
- 10 2.2 General Guidelines
- 11 2.3 Supplied Items
- 11 2.3.1 Standard Supplied Items
- 11 2.3.2 Replacement Items
- 12 2.3.3 Optional Items
- 13 2.4 Product Description
- 13 2.4.1 Ascent Series
- 14 2.4.2 Alta (F Series)
- 15 2.5 Power and Signal Connections
- 17 SECTION 3: INSTALLING YOUR CAMERA SOFTWARE
- 17 3.1 Install/Update Apogee Camera Driver
- 17 3.1.1 For Windows XP
- 19 3.1.2 For Windows Vista/ Windows 7 or more recent
- 20 3.2 Install MaxIm DL/CCD
- 20 3.3 Uninstalling Apogee Software
- 21 SECTION 4: SETTING UP MAXIM DL/CCD SOFTWARE TO CONTROL YOUR APOGEE CAMERA
- 26 SECTION 5: CONNECTING YOUR CAMERA
- 26 5.1 Mounting your Camera
- 27 5.2 Connecting the power and signal cables
- 27 5.2.1 Apogee Alta
- 28 5.2.2 Apogee Ascent
- 29 SECTION 6: CLEANING
- 29 6.1 General Cleaning Information
- 29 6.2 Cleaning the Camera Window
- 30 6.2.1 Tools Required
- 30 6.2.2 Window Cleaning Procedure
- 33 SECTION 7: USING YOUR APOGEE CAMERA
- 33 7.1 Standard CCD Image Calibration Procedures
- 33 7.2 Dark Current Correction
- 34 7.3 Bias correction
- 34 7.4 Flat field correction
- 34 7.5 Further processing
- 35 7.6 Combining images
- 35 7.7 Field of View and Scale
- 36 SECTION 8: SPECIFICATIONS
- 36 8.1 Ascent – General Specifications
- 37 8.2 Alta – General Specifications
- 38 8.3 Mechanical Drawings – Ascent
- 39 8.4 Mechanical Drawings – Alta
- 39 D01
- 40 D02
- 41 D07
- 42 D10
- 43 SECTION 9: APOGEE FILTER WHEEL INSTALLATION
- 43 9.1 Introduction and Setup
- 43 9.2 Update Apogee Driver (Apogee.DLL)
- 43 9.3 Windows XP Driver Installation
- 46 9.4 Windows 7 Driver Installation
- 47 9.5 Install MaxIm DL/CCD
- 47 9.6 Using MaxIm DL/CCD
- 49 9.7 Filter Wheel Installation
- 49 9.7.1 Installing Filters
- 52 9.7.2 Mounting the Filter Wheel to the Camera
- 53 9.7.3 Installing Adapter
- 53 9.8 Setup Suggestions
- 54 SECTION 10: TROUBLESHOOTING
- 55 APPENDIX: OTHER INFORMATION
- 55 Terms and Conditions of Sale and Warranty Information
- 55 Waste Electronic and Electrical Equipment Regulations 2006 (WEEE)