advertisement
Preface
The
SecureTransport Getting Started Guide provides instructions for performing the initial setup and configuration of the SecureTransport software.
Use this documentation to:
l
Install licenses
l
Change the keystore password
l
Generate certificates
l
Generate or import certificate authority
l
Perform initial database settings
l
Preform initial setup of servers
l
Exchange CA certificates
l
Cleanup the setup account
This document describes how to set up and configure SecureTransport for basic operation. It assumes SecureTransport is already installed and ready to configure. If SecureTransport has not been installed or there are questions relating to the installation, see the SecureTransport Installation
Guide.
The Setup Administrator account is used only for the initial post-installation configuration. Use the
Setup Administrator account to configure key items needed for SecureTransport to function. These items are listed in the Starting Setup chapter of this guide. After the initial setup is complete, use the administrator login for further configuration and future maintenance and changes. Refer to the
SecureTransport Administrator's Guide for more information.
You can also export server configuration from a SecureTransport installation and import it into your new or upgraded installation. However, you cannot export licenses, so you must install them on a new server. See the topic on export and import of server configuration in the SecureTransport
Administrator's Guide.
Who should read this guide
This document is intended for system administrators who perform the setup and initial configuration of the SecureTransport software. As the SecureTransport setup administrator, you must be able to work effectively with the operating system platform and network used by SecureTransport. You must have administrative privileges on the computers where you will setup SecureTransport and appropriate access to systems that SecureTransport depends on, such as an external database and file system.
Others who may find parts of this guide useful include network or systems administrators, database administrators and other technical or business users.
Axway SecureTransport 5.3.0
Getting Started Guide 5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
advertisement
Table of contents
- 5 Who should read this guide
- 6 Related documentation
- 7 Get more help
- 7 Axway forums
- 7 Training
- 8 Documentation accessibility
- 8 Keyboard-only navigation
- 8 Screen reader support
- 8 Support for high contrast and accessible use of colors
- 10 SecureTransport Server checklist
- 12 SecureTransport Edge checklist
- 13 Logging onto the server
- 14 Setup steps
- 14 Viewing server log messages
- 15 Viewing audit log messages
- 16 Installing server licenses
- 17 Ad hoc user licenses
- 19 Changing the keystore password
- 20 Generating a permanent internal certificate authority
- 22 Importing an external certificate authority
- 25 SecureTransport certificates
- 29 Change the embedded database port or password
- 29 Migrating data from the embedded database to Oracle
- 33 Key alias
- 33 FIPS transfer mode
- 33 Configuring FTP servers
- 34 Configuring HTTP servers
- 34 Configuring AS2
- 35 Configuring SSH
- 35 Configuring PeSIT
- 36 Starting the Transaction Manager server on SecureTransport Server
- 36 Configuring the Proxy Server on SecureTransport Edge
- 36 Starting the Monitor server
- 37 Exporting the SecureTransport Server CA certificate
- 38 Importing the SecureTransport Server CA certificate
- 39 Exporting the SecureTransport Edge CA certificate
- 40 Importing the SecureTransport Edge CA certificate
- 42 Create test account
- 45 Access test account
- 46 Transfer test file
- 47 Verify file transfer