- No category
advertisement
xvi
| Preface
Based on the testing described below and information contained herein, this instrument bears the CE mark.
Directive 2004/108/EC: Electromagnetic Compatibility
Emissions - CLASS A
EN 50081-1 and IEC 61326-1
EN 55022 Class A
This equipment has been designed and tested to CISPR 11 Class A. In a domestic environment it may cause radio interference, in which case, you may need to mitigate the interference.
Immunity
EN 50082-1 and IEC 61326-1
IEC 1000-4-2 Electrostatic Discharge
IEC 1000-4-3 Radiated EM Fields
IEC 1000-4-4 Electrical Fast Transient/Burst
IEC 1000-4-5 Surge Immunity
EN 61000-4-6 Conducted Disturbances
EN 61000-4-11 Voltage Dips, Short Interruptions and Variations
Directive 73/23/EEC Low Voltage
EN 61010-1:
“Safety requirement for electrical equipment for measurement, control and laboratory use. Part 1, General requirements.”
Directive 2002/96/EC: Waste Electrical and Electronic Equipment
Disposal Notice.
This instrument contains printed circuit boards and wiring with lead solder. Dispose of the instrument according to Directive 2002/96/EC, “on waste electrical and electronic equipment (WEEE).”
Directive 98/79/EC: In Vitro Diagnostics (some models)
• Product registration with competent authorities
• Traceability to the U.S. National Institute of Standards and Technology (NIST):
Dispense precision and average residual volume is traceable to NIST.
BioTek Instruments, Inc.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Notices
- 5 Contents
- 10 Contact Information
- 11 Document Conventions
- 12 Revision History
- 15 Intended Use Statement
- 15 Quality Control
- 15 Repackaging and Shipping
- 15 Warnings
- 16 Hazards and Precautions
- 18 Directives
- 19 Electromagnetic Interference and Susceptibility
- 19 User Safety
- 20 Safety Symbols
- 24 Introducing the ELx50 Microplate Strip Washer
- 25 ELx50 Washer Variations
- 25 Manifold Variations
- 27 Carrier Variations
- 27 Software Variations
- 29 Hardware Features
- 30 Accessories Included
- 31 Optional Accessories
- 32 Specifications
- 32 Microplates
- 32 Electrical
- 32 Physical
- 32 Hardware
- 33 Performance Specifications
- 34 Product Support & Service
- 34 Contacting the Technical Assistance Center
- 34 Returning Instruments for Service/Repair
- 36 Unpacking and Inspecting the Instrument
- 42 Setting Up the ELx50
- 42 Operating Environment
- 42 Installing the Carrier and Manifold
- 42 Microplate Carrier
- 43 8-, 8s-, or 12-Channel Manifold
- 44 16-Channel Manifold
- 45 Aspiration Carrier (ELx50™/8FMW)
- 47 Connecting the Tubes and Bottles
- 47 Before Connecting the Tubes and Bottles
- 50 Waste System
- 53 Supply System
- 56 Liquid Level Alert™ Option
- 57 Final Check
- 57 Attaching the Mist Shield
- 58 Connecting the Power Supply and Cord
- 58 Serial Port for Communication With Other Devices
- 59 Verifying Performance
- 60 Repackaging and Shipping
- 60 Before Repackaging the Instrument
- 61 Repackaging the ELx50 and Its Accessories
- 74 ELx50 Front Panel
- 75 Keypad Description
- 76 Entering Program Names
- 76 System Startup
- 78 Main Menu
- 79 General Usage Guidelines
- 78 Before Running Any Program
- 80 Maintenance
- 80 Programming Considerations
- 81 Liquid Level Alert™ Option
- 83 Wash
- 82 Run Wash Program
- 83 Define Wash Program
- 83 Define Wash Program Options
- 84 Define Wash METHOD Program Options
- 86 Define Wash DISPENSE (DISP) Program Options
- 89 Define Wash ASPIRATION (ASPIR) Program Options
- 93 Edit Wash Program
- 93 Copy Wash Program
- 93 Delete Wash Program
- 96 Prime
- 94 Define Prime Program
- 96 Run Prime Program
- 96 Edit Prime Program
- 97 Copy Prime Program
- 97 Delete Prime Program
- 100 Dispense
- 98 Define Dispense Program
- 98 Run Dispense Program
- 99 Edit Dispense Program
- 99 Copy Dispense Program
- 100 Delete Dispense Program
- 103 Aspiration
- 101 Define Aspiration Program
- 102 Run Aspiration Program
- 103 Edit Aspiration Program
- 103 Copy Aspiration Program
- 104 Delete Aspiration Program
- 107 Soak
- 105 Define Soak Program
- 106 Edit Soak Program
- 106 Copy Soak Program
- 107 Delete Soak Program
- 110 Linking Programs
- 108 Define Link Program
- 109 View Link Program
- 109 Run Link Program
- 110 Delete Link Program
- 113 Utility
- 111 Tests
- 111 Self-Test (SLFCHK)
- 111 Configuration Information (CHKSUM)
- 112 Setup
- 112 Manifold (MANIFLD)
- 112 SENSOR
- 113 AutoPrime
- 116 Menu Maps
- 120 Overview
- 121 Recommended Maintenance Schedule
- 122 Recommended Performance Verification Schedule
- 123 Warnings & Precautions
- 124 Maintenance Programs
- 125 Prime Programs
- 126 Daily Maintenance
- 126 DAY_RINSE
- 126 AUTOPRIME
- 127 AutoPrime Program Options
- 128 Overnight Maintenance
- 128 OVERNIGHT_LOOP
- 129 RINSE_AND_SOAK
- 130 Monthly Maintenance
- 130 Tools and Supplies
- 131 Cleaning the Bottles
- 131 Cleaning the Manifold
- 132 Cleaning the Aspirate and Dispense Tubes
- 132 8-, 8s-, or 12-Channel Manifold:
- 132 16-Channel Manifold:
- 133 Cleaning the Carrier
- 133 Microplate Carrier
- 134 Aspiration Carrier (ELx50™/8FMW only)
- 136 Cleaning the Check Valves
- 137 Long-Term Storage Maintenance
- 137 LONG_SHUTDOWN
- 138 Disinfect the Aspiration Carrier (ELx50™/8FMW)
- 138 Storing the ELx50™
- 139 Decontamination
- 139 Purpose
- 140 Tools and Supplies
- 141 Decontamination Procedure for External Components
- 141 Decontamination Procedure for Tubing and Manifold
- 142 Alternate Decontamination Procedure for Tubing and Manifold
- 142 Decontamination Procedure for Aspiration Carrier (ELx50/8FMW)
- 144 Performance Verification
- 145 Installation Qualification (IQ)
- 145 Operational Qualification (OQ)
- 146 Performance Qualification (PQ)
- 147 Self-Test and Checksum Test
- 148 Liquid Tests for the 8-, 8s- and 12-Channel Manifolds
- 148 Evacuation Efficiency and Dispense Precision Tests
- 148 Materials
- 149 Evacuation Efficiency Test Procedure
- 150 Dispense Precision Test Procedure
- 151 Liquid Tests Worksheet (8-, 8s-, and 12-Channel Manifolds)
- 152 Liquid Tests for the 16-Channel Manifold
- 152 Evacuation Efficiency and Dispense Precision Tests
- 152 Materials
- 153 Evacuation Efficiency Test Procedure
- 154 Dispense Precision Test Procedure
- 155 Liquid Tests Worksheet (16-Channel Manifold)
- 156 Liquid Test for the Aspiration Carrier (ELx50/8FMW)
- 156 Evacuation Efficiency Test
- 156 Materials
- 156 Evacuation Efficiency Test Procedure
- 158 Liquid Test Worksheet (Aspiration Carrier)
- 159 Maintenance/Performance and Operational Logs
- 164 Overview
- 164 Troubleshooting Checklist
- 165 Troubleshooting Charts
- 165 Washer Start-Up
- 166 Fluid Aspiration
- 170 Fluid Delivery
- 172 Fluid Leakage
- 173 Carrier Movement
- 173 Washer Manifold Movement
- 174 Microplate Scratches
- 174 Syringe Drive Movement