3.21. Model Decal Placement. Westfield MK Flex 71', MK Flex 81', MK Flex 91', MK Flex 111'

W

ESTFIELD

- MK F

LEX

A

UGER

71’ - 111’

3.21. MODEL DECAL PLACEMENT

3. A

SSEMBLY

3.21. M

ODEL

D

ECAL

P

LACEMENT

Figure 3.79

Important:

Do not cover any existing safety or instruction decals with the model decals.

For most decal placement, follow the figure above. Apply decals to both sides of auger tube.

Lower Tubes: Place decals just below the angle flange, centered on the tube.

Decals must be easily seen from the ground when auger assembly is complete.

(For 36' augers, the model decal can be located in the center of the lower tube.)

Upper Tubes: Place Westfield decals in the center of the upper tube, where they are easily seen from the ground when auger assembly is complete. For the

W130 & MK130 series, the Westfield decal is located at the top end of the upper middle tube.

30650 R5 77

3. A

SSEMBLY

3.21. M

ODEL

D

ECAL

P

LACEMENT

W

ESTFIELD

- MK F

LEX

A

UGER

71’ - 111’

78 30650 R5