14
3
Transferring and printing pictures
CAUTION:
Install Kodak EasyShare software before connecting the camera or
optional dock to the computer. Failure to do so may cause the software to load incorrectly.
Minimum system requirements
Windows OS-based computers
■
■
■
■
■
■
■
■
Windows 98, 98SE, ME, 2000 SP1, or
XP OS
Macintosh computers
■
Internet Explorer 5.01 or higher
233 MHz processor or greater
64 MB RAM (128 MB RAM for
Windows XP OS)
200 MB hard disk space available
CD-ROM drive
Available USB port
Color monitor, 800 x 600 pixels (16-bit or 24-bit recommended)
■
■
■
■
■
■
■
Power Mac G3, G4, G5, G4 Cube, iMac; PowerBook G3, G4; or iBook computers
Mac OS X version 10.2.3, 10.3
Safari 1.0 or higher
128 MB RAM
200 MB hard disk space available
CD-ROM drive
Available USB port
Color monitor, 1024 x 768 pixels
(thousands or millions of colors recommended)
NOTE: To download EasyShare software, visit
www.kodak.com/go/c330downloads.
www.kodak.com/go/support
Transferring and printing pictures
Installing the software
CAUTION:
Install Kodak EasyShare software before
connecting the camera or optional dock to the computer. Failure to do so may cause the software to load incorrectly.
1 Close all software applications that are open on your computer (including anti-virus software).
2 Place the Kodak EasyShare software CD into the CD-ROM drive.
3 Load the software:
Windows OS-based computer
—
if the install window does not appear, choose
Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD.
Mac OS X
—
double-click the CD icon on the desktop, then click the Install icon.
4 Follow the on-screen instructions to install the software.
Windows OS-based computer
—
select Typical to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install.
Mac OS X
—
follow the on-screen instructions.
NOTE: When prompted, take a few minutes to electronically register your camera and software. This lets you receive information regarding software updates and registers some of the products included with the camera. You must be connected to your Internet service provider to register electronically.
To register later, see
www.kodak.com/go/register.
5 If prompted, restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details.
For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the Kodak EasyShare software.
www.kodak.com/go/support
15
Transferring and printing pictures
Transferring pictures with the USB cable
1 Turn off the camera.
2 Plug the labeled end of the USB cable into the labeled USB port on your computer. See your computer user’s guide for details.
3 Plug the other end of the USB cable into the labeled
USB port on the camera.
4 Turn on the camera.
Kodak EasyShare software opens on your computer.
The software prompts you through the transfer process.
NOTE: Visit
www.kodak.com/go/howto
for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■
■
Kodak EasyShare camera dock, Kodak EasyShare printer dock (see
)
Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or
www.kodak.com/go/c330accessories
.
16
www.kodak.com/go/support
Transferring and printing pictures
Printing pictures
Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directly—with or without a computer. The printer dock may require a D-22 Adapter (see
).
Purchase this and other accessories at a dealer of Kodak products or
www.kodak.com/go/c330accessories
.
Direct printing with a PictBridge enabled printer
Your camera is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers. You need:
■
Camera with fully-charged batteries, or with optional Kodak 3-volt AC adapter
■
■
PictBridge enabled printer
USB cable (may be sold separately)
Connecting the camera to a PictBridge enabled printer
1 Turn off the camera and printer.
2 Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into the camera and into an electrical outlet.
3 Connect the appropriate USB cable from the camera to the printer. (See your printer user guide or
www.kodak.com/go/c330accessories
for details.)
www.kodak.com/go/support
17
Transferring and printing pictures
Printing from a PictBridge enabled printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu interface turns off, press any button to redisplay it.
2 Press to choose a printing option, then press the OK button.
Current Picture Press
Index Print
to choose a picture. Choose the number of copies.
Tagged Pictures If your printer is capable, print pictures that you tagged for printing and choose a print size.
Print thumbnails of all pictures. This requires one or more sheets of paper. If the printer is capable, choose a print size.
All Pictures
Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of copies.
Image Storage
Access internal memory, a card, or Favorites.
NOTE: During direct printing, pictures are not permanently transferred or saved to the computer or printer.
To transfer pictures to your computer, see
. In Favorites mode, the current favorite picture is displayed.
18
www.kodak.com/go/support
Transferring and printing pictures
Disconnecting the camera from a PictBridge enabled printer
1 Turn off the camera and printer.
2 Disconnect the USB cable from the camera and the printer.
Ordering prints online
■
■
Kodak EasyShare print service (provided by Kodak EasyShare Gallery at
www.kodakgallery.com
) is one of the many online print services offered in the Kodak
EasyShare software. You can easily:
Upload your pictures.
Edit, enhance, and add borders to your pictures.
■
■
Store pictures, and share them with family and friends.
Order high-quality prints, photo greeting cards, frames, and albums—and have them delivered to your door.
Printing pictures from your computer
For details on printing pictures from your computer, click the Help button in the Kodak
EasyShare software.
Printing from an optional SD or MMC card
■
■
Automatically print tagged pictures when you insert your card into a printer with an SD or MMC card slot. See your printer user’s guide for details.
Make prints at an SD or MMC card-capable Kodak picture maker. (Contact a location prior to visiting. See
www.kodak.com/go/picturemaker
.)
■ Take the card to your local photo retailer for professional printing.
www.kodak.com/go/support
19
Transferring and printing pictures
Dock compatibility for your camera
Kodak EasyShare dock
■
■
■
■
■
■
■ printer dock 4000 camera dock II
LS420, LS443 camera dock printer dock printer dock plus printer dock 6000 camera dock 6000
Docking configuration
Not compatible
Custom camera insert
D-22 Adapter
Dock
■ others, including series 3 printer docks and camera docks
Custom camera insert
(included with camera)
Dock
Purchase camera docks, printer docks, and other accessories at a dealer of Kodak products or
www.kodak.com/go/c330accessories
.
20
www.kodak.com/go/support
