Transferring and printing pictures. Kodak 1290840, C330, EasyShare C330, CW330 - 4MP 3x Optical/5x Digital Zoom Camera, 4321F, EasyShare CW330, Easyshare C330 4 MP Digital Camera

Below you will find brief information for EasyShare C330. This user guide helps you set up your Kodak EasyShare C330 digital camera, take pictures and videos, transfer them to your computer, print directly to a PictBridge enabled printer, and customize the camera settings. Discover features like the self-timer, burst mode, slide show, and various picture-taking modes to enhance your photography experience.

PDF

Document

Transferring and printing pictures

CAUTION:

Install Kodak EasyShare software before connecting the camera or

optional dock to the computer. Failure to do so may cause the software to load incorrectly.

Minimum system requirements

Windows OS-based computers

■

Windows 98, 98SE, ME, 2000 SP1, or

XP OS

Macintosh computers

■

Internet Explorer 5.01 or higher

233 MHz processor or greater

64 MB RAM (128 MB RAM for

Windows XP OS)

200 MB hard disk space available

CD-ROM drive

Available USB port

Color monitor, 800 x 600 pixels (16-bit or 24-bit recommended)

■

Power Mac G3, G4, G5, G4 Cube, iMac; PowerBook G3, G4; or iBook computers

Mac OS X version 10.2.3, 10.3

Safari 1.0 or higher

128 MB RAM

200 MB hard disk space available

CD-ROM drive

Available USB port

Color monitor, 1024 x 768 pixels

(thousands or millions of colors recommended)

NOTE: To download EasyShare software, visit

www.kodak.com/go/c330downloads.

www.kodak.com/go/support

Transferring and printing pictures

Installing the software

CAUTION:

Install Kodak EasyShare software before

connecting the camera or optional dock to the computer. Failure to do so may cause the software to load incorrectly.

1 Close all software applications that are open on your computer (including anti-virus software).

2 Place the Kodak EasyShare software CD into the CD-ROM drive.

3 Load the software:

Windows OS-based computer

—

if the install window does not appear, choose

Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD.

Mac OS X

—

double-click the CD icon on the desktop, then click the Install icon.

4 Follow the on-screen instructions to install the software.

Windows OS-based computer

—

select Typical to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install.

Mac OS X

—

follow the on-screen instructions.

NOTE: When prompted, take a few minutes to electronically register your camera and software. This lets you receive information regarding software updates and registers some of the products included with the camera. You must be connected to your Internet service provider to register electronically.

To register later, see

www.kodak.com/go/register.

5 If prompted, restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details.

For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the Kodak EasyShare software.

www.kodak.com/go/support

Transferring and printing pictures

Transferring pictures with the USB cable

1 Turn off the camera.

2 Plug the labeled end of the USB cable into the labeled USB port on your computer. See your computer user’s guide for details.

3 Plug the other end of the USB cable into the labeled

USB port on the camera.

4 Turn on the camera.

Kodak EasyShare software opens on your computer.

The software prompts you through the transfer process.

NOTE: Visit

www.kodak.com/go/howto

for an online tutorial on connecting.

Also available for transferring

You can also use these Kodak products to transfer your pictures and videos.

■

Kodak EasyShare camera dock, Kodak EasyShare printer dock (see

page 20

)

Kodak multi-card reader, Kodak SD multimedia card reader-writer

Purchase these and other accessories at a dealer of Kodak products or

www.kodak.com/go/c330accessories

www.kodak.com/go/support

Transferring and printing pictures

Printing pictures

Printing with a Kodak EasyShare printer dock

Dock your camera to the Kodak EasyShare printer dock and print directly—with or without a computer. The printer dock may require a D-22 Adapter (see

page 20

Purchase this and other accessories at a dealer of Kodak products or

www.kodak.com/go/c330accessories

Direct printing with a PictBridge enabled printer

Your camera is compatible with PictBridge technology, so you can print directly to

PictBridge enabled printers. You need:

■

Camera with fully-charged batteries, or with optional Kodak 3-volt AC adapter

■

PictBridge enabled printer

USB cable (may be sold separately)

Connecting the camera to a PictBridge enabled printer

1 Turn off the camera and printer.

2 Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into the camera and into an electrical outlet.

3 Connect the appropriate USB cable from the camera to the printer. (See your printer user guide or

www.kodak.com/go/c330accessories

for details.)

www.kodak.com/go/support

Transferring and printing pictures

Printing from a PictBridge enabled printer

1 Turn on the printer. Turn on the camera.

The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu interface turns off, press any button to redisplay it.

2 Press to choose a printing option, then press the OK button.

Current Picture Press

Index Print

to choose a picture. Choose the number of copies.

Tagged Pictures If your printer is capable, print pictures that you tagged for printing and choose a print size.

Print thumbnails of all pictures. This requires one or more sheets of paper. If the printer is capable, choose a print size.

All Pictures

Print all pictures in internal memory, on a card, or in Favorites.

Choose the number of copies.

Image Storage

Access internal memory, a card, or Favorites.

NOTE: During direct printing, pictures are not permanently transferred or saved to the computer or printer.

To transfer pictures to your computer, see

page 14

. In Favorites mode, the current favorite picture is displayed.

www.kodak.com/go/support

Transferring and printing pictures

Disconnecting the camera from a PictBridge enabled printer

1 Turn off the camera and printer.

2 Disconnect the USB cable from the camera and the printer.

Ordering prints online

■

Kodak EasyShare print service (provided by Kodak EasyShare Gallery at

www.kodakgallery.com

) is one of the many online print services offered in the Kodak

EasyShare software. You can easily:

Upload your pictures.

Edit, enhance, and add borders to your pictures.

■

Store pictures, and share them with family and friends.

Order high-quality prints, photo greeting cards, frames, and albums—and have them delivered to your door.

Printing pictures from your computer

For details on printing pictures from your computer, click the Help button in the Kodak

EasyShare software.

Printing from an optional SD or MMC card

■

Automatically print tagged pictures when you insert your card into a printer with an SD or MMC card slot. See your printer user’s guide for details.

Make prints at an SD or MMC card-capable Kodak picture maker. (Contact a location prior to visiting. See

www.kodak.com/go/picturemaker

■ Take the card to your local photo retailer for professional printing.

www.kodak.com/go/support

Transferring and printing pictures

Dock compatibility for your camera

Kodak EasyShare dock

■

■ printer dock 4000 camera dock II

LS420, LS443 camera dock printer dock printer dock plus printer dock 6000 camera dock 6000

Docking configuration

Not compatible

Custom camera insert

D-22 Adapter

Dock

■ others, including series 3 printer docks and camera docks

Custom camera insert

(included with camera)

Dock

Purchase camera docks, printer docks, and other accessories at a dealer of Kodak products or

www.kodak.com/go/c330accessories

www.kodak.com/go/support

Key features

4.0 MP resolution for detailed prints
3x optical zoom to get closer to your subjects
Multiple scene modes for various shooting conditions
Video recording capability with sound
Easy transfer of pictures and videos to a computer
Direct printing with PictBridge enabled printers
Customizable settings to personalize your camera experience

Frequently asked questions

Press Menu, navigate to the Setup Menu, choose Date/Time, and use the directional buttons to change the values. Press OK to accept.

Turn off the camera, connect the labeled end of the USB cable to the labeled port on your computer, connect the other end to the camera, and turn on the camera. Kodak EasyShare software will open on your computer.

In Review mode, navigate to the picture and press Menu. Select Protect, then press OK to protect the image. The Protect icon will appear on the protected photo or video.