During Use. Eurotherm iX T12

Safety Precautions

•

•

•

Separate the high voltage, signal and supply cables.

Make sure that the voltage and polarity of the power source is correct before connecting the product to the power outlet.

Peripheral equipment must be appropriate for the application and location.

1.4 During Use

•

•

•

Keep the operator panel clean.

Emergency stop and other safety functions may not be controlled from the operator panel.

Do not use too much force or sharp objects when touching the keys, touchscreen etc.

1.5 Service and Maintenance

•

•

•

•

•

Only qualified personnel should carry out repairs.

The agreed warranty applies.

Before carrying out any cleaning or maintenance operations, disconnect the equipment from the electrical supply.

Clean the display and surrounding front cover with a soft cloth and mild detergent.

Replacing the battery incorrectly may result in explosion. Only use batteries recommended by the supplier. During the warranty period, the battery needs to be replaced by an authorized Beijer Electronics service center.

1.6 Dismantling and Scrapping

•

•

The operator panel or parts thereof shall be recycled according to local regulations.

The following components contain substances that might be hazardous to health and the environment: lithium battery, electrolytic capacitor and display.

1.7 Appearance of Air in Touch Screen

•

The layer structure of the touch screen contains air and in rare cases appearance of bubbles can arise. This is purely cosmetic and does not affect any functionality of the panel. The appearance can occur under certain environmental conditions such as temperature, humidity, and atmospheric pressure.

Beijer Electronics, MAEN096C

6