- No category
advertisement
SAFETY
TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS
MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING
YOUR PERSONAL SAFETY AND THE SAFETY OF OTHERS. FAILURE TO
FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.
!
THIS SYMBOL MEANS
-ATTENTION
-BECOME ALERT
-YOUR SAFETY IS INVOLVED!
SIGNAL WORDS
Note the use of the following signal words
DANGER, WARNING, and CAUTION with the safety messages. The appropriate signal word for each has been selected using the following guidelines:
WARNING:
Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER:
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.
This signal word is to be limited to the most extreme situations typically for machine components which, for functional purposes, cannot be guarded.
CAUTION:
Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.
It may also be used to alert against unsafe practices.
If you have questions not answered in this manual , require additional copies, or if your manual is damaged, please contact your dealer or Dethmers Mfg. Co., P.O. Box 189, 4010 320th Street, Boyden,
IA 51234 ph: (712) 725-2311 Toll Free: 1-800-543-3626 Fax: (712) 725-2380 www.demco-products.com
Page 5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 General Information
- 3 Warranty Registration
- 5 Safety , Signal Words
- 6 Equipment Safety Guidelines
- 6 Lighting and Marking
- 7 Safety Sign Care
- 7 Before Operation
- 8 During Operation
- 9 Following Operation
- 9 Highway and Transport Operations
- 10 Remember
- 10 Performing Maintenance
- 11 Bolt Torque
- 12 Saddle and Tank Installation
- 13 DB1 Boom Mounting Breakdown
- 14 RMR1 Single Section Plumbing
- 15 RMR3 Three Section Plumbing
- 16 Valve Mounting and Location
- 16 Operating Instructions
- 17 RMU 110 and 150 Parts Breakdown and List
- 17 Rear Mount to Tractor Three Point
- 18 Handgun Breakdown
- 18 C7560D Roller Pump Breakdown
- 19 By-Pass Valve Breakdown
- 19 Direct-O-Valve Breakdown
- 19 Tee Valve Breakdown
- 20 Sprayer Checklist