- Home
- Home security & automation
- Security access control systems
- Detection Systems
- DS7400Xi
- User manual
advertisement
The Master Keypad - DS7447 only
Your system may include a Master keypad.
A Master keypad is a DS7447 keypad programmed to give a user access to all the partitions he has access to, not just the partition the Master keypad is in. This is different from a Standard keypad in that Standard keypads only give access to the single partition they are in. Commands entered at the Master keypad will affect all the partitions the user has access to. If this is not desirable, the
Master keypad can also be used to control each partition individually; this is called Single Partition Mode. Single Partition Mode allows a user to control any or all of the partitions he has access to on an individual (one by one) basis (see page 41 for more information on Single Partition Mode).
In order to use the Master keypad, your PIN must be assigned to the partition that the Master keypad is located in.
Displays at the Master keypad (also see the following page)
Master keypad displays will differ slightly from Standard keypads. The Master keypad display will scroll the Status of each partition, followed by the partition number. For example, if all partitions are armed, the Master keypad will scroll through the following displays:
If only partitions 1, 2, 3, 4, 6, and 8 are armed, the Master keypad will scroll through the following displays:
Displays for partitions that are Not Ready will display in the same manner.
- 37 -
Technical Manuals Online! - http://www.tech-man.com
advertisement
Related manuals
advertisement
Table of contents
- 2 System Overview
- 3 Table of Contents
- 3 Important
- 4 Day to Day Operations
- 4 Understanding the DS7447 and DS7445 Keypads
- 6 Turning ON (arming) your System
- 8 Quick Arming your System
- 10 Force Arming your System
- 11 Zone Bypass
- 12 Automatic Arming
- 13 Automatic Disarming
- 14 Delaying Automatic Arming
- 15 Delayed Arming
- 16 Chime Mode
- 17 Access Control
- 18 Changing the Date
- 19 Changing the Expiration Date (for Temporary PINs)
- 20 Changing the Time
- 21 Emergency Procedures
- 21 Identifying Alarm Sounds
- 21 Fire Alarms
- 22 Turning OFF (disarming) your System under Duress
- 23 Emergency Keypad Alarms / Silencing Alarms
- 24 Fire Reset / Fire Trouble
- 25 Fire Safety
- 25 If Installed in Family Residences
- 26 Installation Considerations
- 27 Personal Identification Numbers
- 27 General Information
- 28 Change a PIN
- 29 PIN Authority Levels
- 30 Error Displays
- 31 System Faults
- 32 Testing your System
- 32 Zone Test
- 33 Battery Test
- 34 Communicator Test
- 35 Fire WalkTest
- 36 Event History Readback
- 37 General Information
- 38 Master Keypad Displays
- 39 Arming from the Master Keypad
- 40 Disarming from the Master Keypad
- 41 Single Partition Mode
- 42 Glossary
- 44 Index
- 45 Quick Reference Guide
- 47 System Features Reference Guide