IEC 61131-3 C Tools User Manual

IEC 61131-3 C Tools Function Specifications

ledGetDefault

Read LED Power Control Parameters

Syntax

#include <ctools.h> struct ledControl_tag ledGetDefault(void);

Description

The ledGetDefault routine returns the default LED power control parameters.

The controller controls LED power to 5000 I/O modules. To conserve power, the

LEDs can be disabled.

The user can change the LED power setting with the LED POWER switch on the controller. The LED power returns to its default state after a user specified time period.

Example

See the example for the ledSetDefault function.

Document (Version 2.50) 5/12/2011 331 331