Shelving configurations. DCS RF24RE3, RF24LE3, RF24LE4

INTERNAL LAYOUT

Loading Tips and Suggestions

Your appliance is equipped with a cantilever shelf system which provides maximum adjust ability and customizing of the shelving arrangements listed below.

Refrigerator:

24" (61 cm) Wide Models:

With a solid door. Figure 11.

Your product comes with:

1 half width perforated stainless steel cantilever shelf.

2 full width perforated stainless steel cantilever shelves.

1 half width door storage rack.

2 full width door storage racks.

To Add or Remove a Shelf

Remove stored product from the shelf. Do not try to remove a loaded shelf from the appliance. Grasp the shelf front with both hands, rotate the front upward and lift out. (See Figure

11). To install a shelf insert the shelf in the appliance and insert the top hooks into the shelf support slots and drop the shelf down so the hooks drop over the bottom of the slots.

Installed shelf tang

!

CAUTION

Never try to move a loaded shelf, remove everything from the shelf before moving. Use both hands when moving the shelf.

Rear tang

(hook) on shelf

!

CAUTION

Make sure your cantilever shelf is secure on the shelf supports by pressing down on the shelf before loading.

Figure 12

Figure 11

11

Shelf support slot

US

CA