Ultrastar C10K600 OEM Specification

Command

Base Template

Set

Get

ParamCheck LRC

Next

Authenticate

GatACL

Description unlocked Locked

Mandatory

Sets a value in a table

Gets (reads) a value in a table

N/A - table operations. Not related to bands/data on drive.

N/A - table operations. Not related to bands/data on drive.

N/A

N/A - table operations. Not related to bands/data on drive.

N/A - table operations. Not related to bands/data on drive

.

TPer implements param check LRC (longitudinal Redundancy Check) on get/set method calls on PIN value

I terates over all the rows of a table.

N/A

Method requires user to specify "where"

(row in table) and a "count". If where not specified, 1st row in table is used. For count not specified, default is number of last row in table. Returns 0 or more row number/uidref pairs currently in use in

N/A - table operations. Not related to bands/data on drive.

N/A – table operations. Not related to bands/data on drive.

table, per parameters specified.

Authenticate an authority within a session

(session must have successfully begun)

.

Returns contents of access controls associa-

Must be authorized.

N/A - table operation's ACL stored in Method Table. The result is a list of uidrefs to ACE objects.

Must be authorized.

tions. Not to do with bands/data on drive.

N/A – table operations. Not related to bands/data on drive.

Command

Locking Template

Erase

Description unlocked Locked

Mandatory

Cryptographically erases user data in a specified LBA range and resets the access control (locking) of that LBA

Can erase if authorized.

Generates error

.

21.13 Error Codes

All error codes are compliant with the TCG Core specification and SIIF, except in the following case:

• The maximum sessions allowed at any single time is 1. When a session is active and a new session is requested, the drive answers the host with SP_BUSY, instead of NO_SESSIONS_AVAILABLE.

20.14 Customer Specific Requirements

This specification does not cover customer-specific requirements. Customer-specific requirements are submitted by the customer to HGST in the form of a customer-specification document.

HGST Ultrastar C10K600 (SAS) Hard Disk Drive Specification

310