Commissioning. Autronica AutroSafe BS-3, AutroSafe BS-100, AutroSafe BS-60, AutroSafe BS-80

Autronica AutroSafe BS-3 is an interactive fire-alarm system designed to protect life, environment, and property. It offers advanced fire detection and alarm capabilities, providing reliable and effective fire protection for various applications. Here are some key features and use cases of the Autronica AutroSafe BS-3:

Early and reliable fire detection: Utilizes various types of detectors, including smoke, heat, and flame detectors, to detect fire at an early stage, ensuring a prompt response.
Intelligent alarm processing: Employs intelligent algorithms to analyze detector signals and differentiate between genuine fire alarms and false triggers, reducing the risk of false alarms.

Commissioning

6. Commissioning

6.1 Commissioning Procedure

• Refer to the standard commissioning procedure for the AutroSafe system, and download the configuration files

• Start the initialising procedure

For further information, refer to the AutroSafe Commissioning

Handbook.

6.2 Short-Circuit Test

During power-up of the Loop Interfaces (BSD-330), an automatic short-circuit test of the detector loop is carried out. This test causes a current pulse on the +24V output from the BSS-310A power module.

• Make sure that Loop Interfaces with different delay periods have

been used during installation (see Installation, chapter 4)

The BSS-310A power module can supply the current which is required for up to three

Loop Interfaces. If more than three Loop Interfaces are used, a system restart will occur.

To overcome this problem, a random delay period has been configured for each Loop

Interface.

A random delay period is printed on the acceptance label on the Loop Interface (BSD-

330).

Interfacing Analogue Addressable Loops, AutroSafe Interactive Fire-Alarm System P-ASAF-BS100/EE Rev.B, 2006-10-26,

Autronica Fire and Security AS

Page 24

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What is the AutroSafe BS-3 device?

The AutroSafe BS-3 is an interactive fire-alarm system.

What is the purpose of the AutroSafe BS-3?

The AutroSafe BS-3 is used to protect life, environment, and property from fire.

What types of detectors can be connected to the AutroSafe BS-3?

Analogue addressable detectors, including detectors used in systems BS-3, BS-30, BS-60, BS-80, BS-90, and BS-100.

How many analogue addressable loops can be connected to the AutroSafe BS-3?

A maximum of eight Loop Interfaces can be mounted in one AutroSafe panel when using Power Module BSS-310A. A maximum of three Loop Interfaces can be mounted in one AutroSafe panel when using Power Module BSS-310.

Commissioning. Autronica AutroSafe BS-3, AutroSafe BS-100, AutroSafe BS-60, AutroSafe BS-80