advertisement
INTRODUCTION
Contact Info
We stand behind our machines! If you have ques tions or need help, contact us with the information below. Before contacting, make sure you get the serial number and manufacture date from the machine ID label. This will help us help you faster.
Grizzly Technical Support 1815 W. Battlefield Springfield, MO 65807 Phone: (570) 546-9663 Email: [email protected]
We want your feedback on this manual. What did you like about it? Where could it be improved? Please take a few minutes to give us feedback.
Grizzly Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Email: [email protected]
Manual Accuracy
We are proud to provide a high-quality owner’s manual with your new machine!
We made every effort to be exact with the instruc tions, specifications, drawings, and photographs in this manual. Sometimes we make mistakes, but our policy of continuous improvement also means that
sometimes the machine you receive is
slightly different than shown in the manual.
If you find this to be the case, and the difference between the manual and machine leaves you confused or unsure about something, check our website for an updated version. We post current manuals and manual updates for free on our web site at www.grizzly.com.
Alternatively, you can call our Technical Support for help. Before calling, make sure you write down the Manufacture Date and Serial Number from the machine ID label (see below). This information is required for us to provide proper tech support, and it helps us determine if updated documenta tion is available for your machine.
Machine Differences
Models G0855 and G0856 are 3 HP, 8" x 72" joint ers with the following differences: • Model G0855 has a 4-knife cutterhead with high-speed steel knives.
• Model G0856 has a helical cutterhead with 4 spirals and 36 indexable carbide inserts.
Manufacture Date Serial Number -2 Model G0855/G0856 (Mfd. Since 07/19)
advertisement
Related manuals
advertisement
Table of contents
- 4 Contact Info
- 4 Machine Differences
- 4 Manual Accuracy
- 5 Identification
- 6 Controls & Components
- 8 Machine Data Sheet (G0855)
- 12 Safety Instructions for Machinery
- 14 Additional Safety for Jointers
- 17 Needed for Setup
- 17 Unpacking
- 18 Inventory
- 19 Hardware Recognition Chart
- 20 Cleanup
- 21 Site Considerations
- 22 Assembly
- 25 Knife-Setting Jig (G0855)
- 26 Dust Collection
- 26 Test Run
- 27 Tightening Belt
- 27 Disabling & Locking Switch
- 28 Operation Overview
- 29 Stock Inspection & Requirements
- 30 Squaring Stock
- 31 Surface Planing
- 32 Edge Jointing
- 33 Bevel Cutting
- 34 Rabbet Cutting
- 35 Setting Depth of Cut
- 39 Schedule
- 39 Cleaning & Protecting
- 40 Lubrication
- 41 Troubleshooting
- 43 Setting/Replacing Knives (G0855)
- 46 Rotating/Replacing Helical Cutterhead Inserts (G0856)
- 47 Adjusting Gibs
- 48 Checking/Adjusting Table Parallelism
- 49 Setting Outfeed Table Height
- 50 Setting Fence Stops
- 52 CalibratingDepth-of-Cut Scale
- 53 Tensioning/Replacing V-Belt
- 54 Checking/Aligning Pulleys
- 55 Checking/Adjusting Cutterhead Guard
- 56 Wiring Safety Instructions
- 57 Wiring Diagram
- 58 Fence & Cutterhead
- 60 Tables, Base, Stand & Motor
- 62 Labels & Cosmetics