|
ML440 Wireless IP DECT Quick Reference Guide
| 18
2. Dial
2
but do not hang up.
a) If you hang up, the system converts your Camp-On to a Callback.
3. When your co-worker hangs up their initial call, you hear: a) Ringback as their telephone rings.
b) Your co-worker’s voice when they answer.
Callback
Callback is enabled by default.
To leave a Callback at a busy co-worker's extension:
1. Call the busy extension.
a) Listen for busy or busy/ring tone.
b) With IntraMail installed, you will hear a voice prompt first.
2. Dial
2
and hang up.
a) Stay on the line without hanging up if you want to Camp On instead.
3. When your busy co-worker becomes free, you hear Intercom ringing.
4. Press
TALK
to answer the Intercom ring.
a) The system automatically places a call to your co-worker.
b) Speak to your co-worker when the call goes through.
Caller ID
Caller ID is disabled by default.
If enabled in the system and delivered by your service provider, the ML440 display will show the Caller ID information as the call is ringing.
Second Call Caller ID and Third Party Caller ID Check are not available.
Central Office Calls, Answering
Central Office Calls, Answering is enabled by default.
To answer an outside call:
1. Press
TALK
.
a) If you have Ringing Line Preference, this will answer the incoming call.
b) If you have Automatic Handsfree, you can press the line or loop key without first lifting the handset.
2. Press the flashing line or loop key.
a) The key will be on after you answer the call.
b) To review, redial, or return an outside call, press the
CALLS
key (soft key 3).
Central Office Calls, Placing
Central Office Calls, Placing is enabled by default.
To place an outside call using a line or loop key:
1. Press
TALK
.
a) If you have Automatic Handsfree, you can press the line or loop key without first lifting the handset.
