Door Replacement and Adjustment. Viking RDSCE230-5B, F21192 EN, RVER33015BSS, D3 Series

Door Replacement and Adjustment

1 2

3

Reinstall door to range.

4

2

1

2

Open door completely.

Reinstall hinge trim.

3

Troubleshooting

Problem

Range will not function.

Possible Cause and/or Remedy

Range is not connected to electrical power:

Have electrician check power circuit breaker, wiring, and fuses.

Door is not shut tight enough for automatic door latch to lock.

Oven does not operate in self-clean.

Oven is not clean after selfclean cycle.

Broil does not work.

Door will not open.

Oven light will not work.

Temperature control knob not rotated all the way past clean until it stops.

Temperature control knob is rotated too far past broil position.

Oven is still in self-clean mode. If oven is hot, door latch will release when safe temperature is reached.

Light bulb is burned out.

Range is not connected to power.

Remove pins from hole in hinges.

5

Close door.

If the door needs to be adjusted, loosen hinge trim screws (see step 2). Adjust the screws located between the door and kickplate using a 5/32” hex head allen wrench. After adjustment, tighten hinge trim screws.

46 47