System Reporting. Cisco Content Delivery System Manager , Content Acquirer Application , Internet Streamer Application , Service Router Application
광고
광고
C H A P T E R
6
System Reporting
The CDSM provides tools that can be used for system monitoring and system diagnostics. The topics covered in this chapter include:
•
•
•
•
Note
If Virtual Video Infrastructure (VVI) with split-domain management is enabled, the CDSM pages associated with the Vaults and Caching Nodes display only on the VVI Manager (VVIM), and the CDSM pages associated with the Streamers display only on the Stream Manager. For more information, see the
“Virtual Video Infrastructure” section on page D-6 .
Stream Activity
The Stream Activity reports displays information about streams. The available reports are:
•
•
•
•
•
•
To access the available Stream Activity reports, choose Report > Stream Activity, and follow the procedure for the specific report described in the following subsections.
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-1 OL-22792-01
Chapter 6 System Reporting
Stream Activity
Streams by Array
The Stream by Array report lists all streams currently active for a specified group of Streamers.
To view the Stream by Array report, do the following:
Step 1
From the Available Reports drop-down list, choose Streams by Array (
Figure 6-1 Available Reports for Stream Activity
shows the selection fields for the Streams by Array report.
Figure 6-2 Stream By Array Report Selection Fields
Step 2
Step 3
From the Stream Array drop-down list, choose a stream array.
Choose a modifier. See
for a description of each modifier.
6-2
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Stream Activity
Table 6-1 Streams by Array Modifiers
Modifier
None (Date
Only)
Description
Filter on date only.
Destination IP Filters the report by the IP address of the destination device you choose in a later step.
Step 4
Step 5
Step 6
Step 7
Using the drop-down lists provided, or the calendars, choose a From Date and To Date for the report.
Choose a time breakdown of hourly, daily, weekly, or monthly. The maximum time interval allowed for each breakdown is the following:
•
Hourly—31 days
•
•
Daily—2 years
Weekly— 2 years
•
Monthly—2 years
If you selected a modifier that requires a value, choose or specify the filter value.
Click Display.
To clear the fields and start over, click Reset.
with no optional modifiers selected.
Figure 6-3 Streams by Array Report
OL-22792-01
The report displays:
•
Report type (for example, Daily Stream Activity Report for streams by array)
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-3
Stream Activity
Chapter 6 System Reporting
•
From and to dates
•
Date and time of each stream count
•
Total number of standard definition (SD) streams, total number of high-definition (HD) streams, and total streams overall for the time period selected
Click Previous Report to return to the report selection page.
Note
Previous Report returns you to the report selection page or the previous report page in a multi-page report. Next Report takes you to the next page in the report.
Step 8
To see more detail, click the total number of streams link. For example, in Figure 6-3
, click 5 total. The
Session ID Summary is displayed ( Figure 6-4
).
Figure 6-4 Session ID Summary
Note
The Session ID Summary can be sorted by clicking on each column heading.
Step 9
The report displays:
•
•
Session ID
Content name
•
Start and end date and time
The Session ID Summary can be sorted by clicking on each column heading.
To see the stream play history of a specific session, click a session ID (
Note
If Trick Mode Capture is disabled, the session ID does not link to the stream play history. For information on enabling the Trick Mode Capture, see the
“Trick Mode Capture” section on page D-5
.
6-4
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Figure 6-5 Session ID—Stream Play History Drilldown
Stream Activity
The report displays:
•
Session ID
•
•
Set-top box MAC address
Termination reason
•
•
Date and time of each play or trick mode action
Elapsed time of each action
At the bottom of each Stream Play History report is a legend mapping the action to a color.
Click Previous Report to return to the previous page.
Note
Previous Report returns you to the report selection page or the previous report page in a multi-page report. Next Report takes you to the next page in the report.
Step 10
To see details about the stream associated with this session, click Show Stream Data (
OL-22792-01
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-5
Stream Activity
Figure 6-6 Stream Play History–Stream Data
Chapter 6 System Reporting
Step 11
The Stream Data displays:
•
•
Details about the stream (QAM IP address and port, and service group)
Details about the content (content name, ingest information, server ID storing the content, and so on)
Click Hide Stream Data to hide stream data.
Click Previous Report to return to the previous page.
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
Streams by Time
The Streams by Time report summarizes the number of standard-definition and high-definition streams by the selected time breakdown in the specified time period. This report can be used to analyze slow times of day and to plan outages.
To view the Streams by Time report, do the following:
Step 1
From the Available Reports drop-down list, choose Streams By Time.
Figure 6-7 shows the selection
fields for the Streams By Time report.
6-6
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Figure 6-7 Streams by Time Report Selection Fields
Stream Activity
Step 2
Step 3
Step 4
Using the drop-down lists provided, or the calendars, choose a From Date and To Date for the report.
Choose the time breakdown.
Click Display.
To clear the fields and start over, click Reset.
Figure 6-8 shows an example of the Streams by Time report with the Per Hour time breakdown selected.
OL-22792-01
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-7
Stream Activity
Figure 6-8 Streams by Time Report
Chapter 6 System Reporting
The report displays:
•
Report type (for example: Stream Activity Report for streams by time)
•
•
From and to dates
Time of each stream activity survey
•
Total number of streams for each time within the specified from and to dates
Click Previous Report to return to the previous page.
Note
Previous Report returns you to the report selection page or the previous report page in a multi-page report. Next Report takes you to the next page in the report.
Step 5
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
6-8
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Stream Activity
Stream Play History
The Stream Play History report lists the trick mode history for specified streams.
To view the Stream Play History report, do the following:
Step 1
From the Available Reports drop-down list, choose Stream Play History.
selection fields for the Stream Play History report.
Figure 6-9 Stream Play History Report Selection Fields
OL-22792-01
Step 2
Choose a modifier. See Table 6-2 for a description of each modifier.
Table 6-2 Stream Play History Modifiers
Modifier Description
None (Date Only) Displays a list of all streams (Session ID Summary) filtered by the from and to dates.
Session Handle
Destination IP
Filters the report by a session handle you specify in a later step.
Filters the report by the IP address of the destination device you choose in a later step.
Step 3
Using the drop-down lists provided, or the calendars, choose a From Date and To Date for the report.
Note
Selecting Session ID displays the complete play history for the specified session. The From
Date and To Date fields are bypassed.
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-9
Chapter 6 System Reporting
Stream Activity
Step 4
Step 5
Note
Selecting None (Date Only) displays the Session ID Summary. To see the play history of a specific session, click a Session ID in the Session ID Summary report.
If you selected a modifier, choose or specify the filtered value. For example, if you choose Service Group as the modifier, you specify which Service Group.
Click Display.
To clear the fields and start over, click Reset.
shows an example of the Stream Play History report.
Figure 6-10 Stream Play History Report
Note
The Session ID Summary can be sorted by clicking on each column heading.
Step 6
The report displays:
•
Session ID
•
•
Content name
Start and end date and time
To see the stream play history of a specific session, click a session ID (
Note
If Trick Mode Capture is disabled, the session ID does not link to the stream play history. For information on enabling the Trick Mode Capture, see the
“Trick Mode Capture” section on page D-5
.
6-10
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Figure 6-11 Session ID Stream Play History Drilldown
Stream Activity
Step 7
The report displays:
•
Session ID
•
•
Set-top box MAC address
Termination reason
•
•
Server ID of the Play server that served the trick mode
Date and time of each play or trick mode action
•
Elapsed time of each action
Click Previous Report to return to the previous page.
To see details about the stream associated with this session, click Show Stream Data (
).
OL-22792-01
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-11
Stream Activity
Figure 6-12 Stream Play History—Stream Data
Chapter 6 System Reporting
The Stream Data displays:
•
•
Details about the stream (QAM IP address and port, and service group)
Details about the content (content name, ingest information, server ID storing the content, and so on)
Click Hide Stream Data to hide stream data.
Click Previous Report to return to the previous page.
At the bottom of each Stream Play History report is a legend mapping the action to a color.
Note
Previous Report returns you to the report selection page or the previous report page in a multi-page report. Next Report takes you to the next page in the report.
Step 8
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
6-12
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Stream Activity
Cache/Fill Bandwidth
The Cache/Fill Bandwidth report displays details on the content caching activity on a Streamer.
To view the Cache/Fill Bandwidth report, do the following:
Step 1
From the Available Reports drop-down list, choose Cache/Fill Bandwidth.
shows the selection fields for the Cache/Fill Bandwidth report.
Figure 6-13 Cache/Fill Bandwidth Report Selection Fields
OL-22792-01
Step 2
Step 3
Step 4
Step 5
From the Server Array drop-down list, choose a server array.
Using the drop-down lists provided, or the calendars, choose a From Date and To Date for the report.
From the Server ID drop-down list, choose a Streamer.
Click Display.
To clear the fields and start over, click Reset.
Figure 6-14 shows an example of the Cache/Fill Bandwidth report.
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-13
Stream Activity
Figure 6-14 Cache/Fill Bandwidth Report
Chapter 6 System Reporting
The report displays the minimum, average, and maximum bandwidth used for the selected Streamer.
Click Previous Report to return to the previous page.
Note
Previous Report returns you to the report selection page or the previous report page in a multi-page report. Next Report takes you to the next page in the report.
Step 6
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
6-14
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Stream Activity b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
Stream Failures
The Stream Failures report lists the number of stream failures.
To view the Stream Failures report, do the following:
Step 1
From the Available Reports drop-down list, choose Stream Failures.
Figure 6-15 shows the selection
fields for the Stream Failures report.
Figure 6-15 Stream Failures Report Selection Fields
OL-22792-01
Step 2
Step 3
Choose an error code, if applicable. See
in the
“Stream Failures” section on page 5-18
for descriptions of possible error codes.
Choose a modifier. See Table 6-3 for a description of each modifier.
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-15
Chapter 6 System Reporting
Stream Activity
Table 6-3
Modifier
Service Group
Server ID
Stream Failure Modifiers
Description
Filters the report by the service group that you choose in a later step.
Filters the report by a server ID that you choose in a later step.
Step 4
Step 5
Step 6
Step 7
Using the drop-down lists provided, or the calendars, choose a From Date and To Date for the report.
Choose a time breakdown of hourly, daily, weekly, or monthly. The maximum time interval allowed for each breakdown is the following:
•
Hourly—31 days
•
•
Daily—2 years
Weekly—2 years
•
Monthly—2 years
If you selected a modifier, choose the filter value.
Click Display.
To clear the fields and start over, click Reset.
shows an example of the Stream Failures report.
Figure 6-16 Stream Failures Report
Step 8
The report displays:
•
Report type
•
•
From and to dates
Date (and time if applicable) of each time breakdown
•
Total number of failures for each time breakdown selected
To see more detail, click the total number of failures link. The Stream Failure Details report is displayed
(
).
6-16
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Figure 6-17 Stream Failure Details
Stream Activity
OL-22792-01
Step 9
The report displays:
•
•
•
•
•
•
Date and time of the failure
Session ID of the failed stream
QAM IP address
Server ID that was sending the stream at the time of the failure
Service Group
Error code
The report can be sorted by clicking on each column heading.
To see the stream play history of a specific session, click a session ID.
Note
If Trick Mode Capture is disabled, the session ID does not link to the stream play history. For information on enabling the Trick Mode Capture, see the
“Trick Mode Capture” section on page D-5
.
Step 10
Click Previous Report to return to the previous page.
To see details about the stream associated with this session, click Show Stream Data.
Click Hide Stream Data to hide stream data.
Click Previous Report to return to the previous page.
Note
Previous Report returns you to the report selection page or the previous report page in a multi-page report. Next Report takes you to the next page in the report.
Step 11
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-17
Chapter 6 System Reporting
Stream Activity
Content Popularity
The Content Popularity report lists the content by their filenames and ranks them in order of popularity.
To view the Content Popularity report, do the following:
Step 1
From the Available Reports drop-down list, choose Content Popularity.
shows the selection fields for the Content Popularity report.
Figure 6-18 Content Popularity Report Selection Fields
Step 2
Step 3
Using the drop-down lists provided, or the calendars, choose a Start Time and End Time for the report.
Click Display.
To clear the fields and start over, click Reset.
shows an example of the Content Popularity report.
Figure 6-19 Content Popularity Report
6-18
The report displays:
•
•
Report type
Optional modifiers if applicable
•
•
•
From and to dates
Content object name
Total number of streams for each content streamed in the specified time period
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Stream Activity
Step 4
To view content details, click the content object name. The Content Detail report is displayed
(
Figure 6-20 Content Popularity Details
Click Close to close this window.
Click Previous Report to return to the previous page.
Note
Previous Report returns you to the report selection page or the previous report page in a multi-page report. Next Report takes you to the next page in the report.
Step 5
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
OL-22792-01
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-19
Chapter 6 System Reporting
Content Activity
Content Activity
The Content Activity report lists all content stored on all Vaults in the specified group and all unpublished packages. The available reports are:
•
•
Content by Ingest Date
To view the Content by Ingest Date report, do the following:
Step 1
Step 2
Click Report > Content Activity. The Content Activity selection page is displayed.
From the Available Reports drop-down list, choose Content By Ingest Date (
).
Figure 6-21 Content Activity Selection Fields
Step 3
Step 4
Step 5
Step 6
From the Array drop-down list, choose an array.
Using the drop-down lists provided, or the calendars, choose a From Date and To Date for the report.
Choose Include Deleted to include content that has been deleted from the array; otherwise, choose
Exclude Deleted.
Click Display.
To clear the fields and start over, click Reset.
shows an example of the Content Activity report.
6-20
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Figure 6-22 Content Activity Report
Content Activity
Step 7
The report displays:
•
Report type
•
•
From and to dates
Content filenames
•
•
Creation date
Destroyed date
Figure 6-23 Content Detail
OL-22792-01
Click Close to close this window.
Click Previous Report to return to the previous page.
Note
Previous Report returns you to the report selection page or the previous report page in a multi-page report. Next Report takes you to the next page in the report.
Step 8
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-21
Content Activity
Chapter 6 System Reporting b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
Unpublished Package Report
To view the Unpublished Package report, do the following:
Step 1
Step 2
Choose Report > Content Activity. The Content Activity selection page is displayed.
From the Available Reports drop-down list, choose Unpublished Package Report ( Figure 6-24
).
Figure 6-24 Unpublished Package Selection Fields
Step 3
Step 4
Using the drop-down lists provided, or the calendars, choose a From Date and To Date for the report.
Click Display.
To clear the fields and start over, click Reset.
shows an example of the Unpublished Package report.
6-22
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Figure 6-25 Unpublished Package Report
CDSM Audit Logs
Step 5
Step 6
•
•
•
The report displays:
Report type
From and to dates
•
•
•
Package names
Creation date
Source URL
Target URL
•
Number of assets associated with the package
Click New Report to return to the previous page.
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
CDSM Audit Logs
The CDSM Audit log keeps track of every configuration change, deletion of monitored items, and maintenance actions.
To view the CDSM Audit logs, do the following:
Step 1
Choose Report > CDSM Audit logs.
shows the selection fields for the CDSM Audit logs.
OL-22792-01
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-23
CDSM Audit Logs
Figure 6-26 CDSM Audit Log Selection Fields
Chapter 6 System Reporting
Step 2
Step 3
Using the drop-down lists provided, or the calendars, choose a From Date and To Date for the log.
Click Display.
To clear the fields and start over, click Reset.
shows an example of the CDSM Audit log.
Figure 6-27 CDSM Audit Log
Step 4
Step 5
The log displays:
•
•
•
•
From and to dates
Action taken (Section Descriptor)
User who took the action
System used
•
Date the action occurred
To get more information about the action taken, click a section descriptor. The CDSM Audit Log Detail is displayed in a new window. Click Close to close the window.
To download the report to a comma-separated value (CSV) file, do one of the following:
a.
If you are using Internet Explorer as your web browser, click Download and then click Save or
Open. Save presents a Save As dialog box. Open opens the CSV file.
6-24
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Archived Data b.
If you are using another major web browser (for example, Netscape, Firefox, Opera), right-click
Download and choose Save Link As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed.
Archived Data
Note
The CSV files are generated every 24 hours and are deleted when they are older than 30 days. The CSV files are accessible by going to the /arroyo/asmrpt directory, or by using an FTP client with the username
“asmrpt” and the password “asmrpt.”
Monitoring data is archived in comma-separated value (CSV) format for use in a spreadsheet program, database, or other software.
Table 6-4 describes the different archived data.
Table 6-4 Archived Data Types
Archive Description
Log of configuration changes that were made to the system and when the changes were made.
Archive of content ingested.
Archive of all streams.
Archive of trick mode and play actions that occurred on all streams.
To download an archived data report, do the following:
Step 1
Step 2
Step 3
Choose Report > Archived Data. The Archived Data page is displayed.
From the Archives drop-down list, choose an archive and click Next.
Right-click the HTTP link of the report you want to download and choose Save Target As, Save Link
As, Save Link Target As, or Save Target As depending on the web browser you are using. A Save As dialog box is displayed (
OL-22792-01
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-25
Archived Data
Figure 6-28 Save As Dialog Box
Chapter 6 System Reporting
Step 4
Step 5
Choose a location and name for the file and click Save.
The CSV file is compressed using gzip (extension .gz). Decompress the file using a decompression tool that includes the gzip compression code, such as Winzip, PowerArchiver 6.1, or 7-zip.
CDSM Audit Log Archives
The CDSM Audit log archives contain the same information as the CDSM Audit logs. For more information, see the
“CDSM Audit Logs” section on page 6-23
.
Content Reports
Table 6-5 describes the fields in the Content Report CSV files.
Table 6-5 Content Report Archive Fields
Field
mGoid mName mProvider mCategory
Description
Global object identifier. Used by the CDS database.
The name of the content file.
Not applicable.
Not applicable.
mFactoryId mOpState
Not applicable.
Operational state is not used and is always 2 (In Service). mAdminState Administrative state is not used and is always 2 (In Service).
mProvisionForPush Type of FTP provisioned. Values are:
•
•
•
0—FTP pull
1—FTP push
3—Live recording
6-26
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Archived Data
Table 6-5 Content Report Archive Fields (continued)
Field
mURL mIngestIpAddress
Description
URL of the content file. This field is applicable only for FTP pull.
IP address of the ingest interface on the Vault used to download the content file.
mIngestFileSize Content file size, in bytes.
mCreateTime Time and date this content file was created. The time and date is represented in seconds since the start of Unix epoch time.
1 mLastModifiedTime Time and date this content file was last modified. The time and date is represented in seconds since the start of Unix epoch time.
mDeleteTime Time and date this content file was deleted. The time and date is represented in seconds since the start of Unix epoch time
.
Server ID of the Vault server that is the primary source for this content file.
mServerId mAssetName mEncrypted mRate
Asset name of the content, if populated.
Not applicable.
Transmit rate requirement of the file, in bytes per second.
1.
Unix epoch time is 1970-01-01T00:00:00Z
Stream Reports
describes the fields in the Stream Report CSV files.
Table 6-6 Stream Report Archive Fields
Field
mSessionId mGoid mTsIdOut
Description
Session ID of the stream.
Global object identifier. Used by the CDS database.
Not applicable.
mTsIdIn Not applicable.
mProgramNumber Not applicable.
mBandwidthUsed This field is applicable only when Streaming Mode is set to ASI. mQAMIp
The transport stream bandwidth, in bytes, required for this stream object.
IP address of the QAM device that participated in transmitting the stream.
mQAMPort mSetTopMac mServiceGroup mStartTime mLastTime
The IP address is represented as an integer. For example, 3232235818 decimal converts to C0A8012A hexadecimal, which translates to 192.168.1.42
Port the QAM device is using to receive the stream object.
Not applicable.
Not applicable.
Timestamp when the stream was created. The timestamp is represented in seconds since the start of Unix epoch time.
1
Not applicable.
1.
Unix epoch time is 1970-01-01T00:00:00Z
OL-22792-01
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-27
Chapter 6 System Reporting
Archived Data
Stream Failure Reports
Table 6-7 describes the fields in the Stream Failure Report CSV files.
Table 6-7 Stream Failure Report Archive Fields
Field
mSessionId mKey mServerId mGroupId Array ID the Streamer is associated with.
mServiceGroup Service group that participated in transmitting the stream.
mQAMIp mEventTime
IP address of the QAM device that participated in transmitting the stream.
The IP address is represented as an integer. For example, 3232235818 decimal converts to C0A8012A hexadecimal, which translates to 192.168.1.42
Timestamp of when the event occurred. The timestamp is represented in seconds since the start of Unix epoch time.
1 mOperation
Description
Session ID of the failed stream.
CDS database key for this record.
Server ID of the Streamer that participated in transmitting the stream.
mErrorCode mOperand mTask
Operation that was taking place when the stream failed. For example: createStream,
LSCP Command(), createServant, destroy. These are the measurement points or transactional states of the system at the time of the failure. See
for more information.
Error code provides a description of the event that caused the error. See
for more information.
Operand that was being operated on at the time of the failure, for example, the
StreamID is the operand if a stream was being created or controlled at the time of failure.
Failed task is the event category indicating the type of execution sequence that the call stack was currently within at the time of the failure. See
for more information.
1.
Unix epoch time is 1970-01-01T00:00:00Z
Stream Activity Reports
The Stream Activity Reports archive contains all trick mode and play actions of all streams within the
given 24-hour period. Table 6-8 describes the fields that are exported to the CSV file.
Table 6-8
Field
mSessionId mActionTime mServerId mOpState
Stream Activity Report Fields
Description
Session ID of the stream.
Timestamp when the stream activity occurred. The timestamp is represented in seconds since the start of Unix epoch time.
1
Server ID of the Streamer that is providing the stream.
Operational state is not used and is always zero (0).
6-28
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
Chapter 6 System Reporting
Archived Data
Table 6-8 Stream Activity Report Fields (continued)
Field
mStreamState mSpeed
Description
Stream state is not used and is always zero (0).
Speed direction is as follows:
•
•
1 means play
0 means not paused/stopped mNptOffset
•
•
n means n times fast-forward
–n means n times rewind
Current point in time (milliseconds) where the stream is on the set-top box, based on from NPT and to NPT. mDestroyedReason This field is only populated if the stream is destroyed by the CDS orphan stream handler. The CDS orphan stream handler only destroys a stream for one of the following two reasons:
•
Orphan session is detected
•
LSCP timeout maximum has been reached
1.
Unix epoch time is 1970-01-01T00:00:00Z
OL-22792-01
Cisco TV CDS 2.3 RTSP Software Configuration Guide
6-29
Archived Data
Chapter 6 System Reporting
6-30
Cisco TV CDS 2.3 RTSP Software Configuration Guide
OL-22792-01
다운로드
공개 링크 업데이트됨
문서 공개 링크
광고