advertisement
External Display
You can switch the output destination to an external analog display.
Connect the external display to the external display port (VGA) (A).
61
Switching the Display Mode
1
Press
Fn
+
F3
.
2
Click the Display mode.
1
Press
Fn
+
F3
.
Each time you press the key combination:
Internal LCD Simultaneous display External display
NOTE
z Until Windows startup is completed (during Setup Utility, etc.), the simultaneous display cannot be used and pressing
Fn + F3 switches the display between the internal LCD and the external display.
z
or hibernation, or restarting the computer, the output destination may not be the same as
the selected in the previous status.
z When you change the display after Windows starts up, do not press any key until switching is complete.
z Display switching by pressing + P
or Fn + F3 may not work when you use the Fast User Switching function to switch the user. In this case, log off all users and restart the computer.
z Do not connect or remove the external display during sleep
z It may take some time to switch between displays depending on the displays used.
z When you use the external display only, set the suitable number of colors, resolution, or refresh rate separately from when you use the internal LCD only or when you use the simultaneous display.
Depending on the settings, some external displays may be distorted or may not display the mouse cursor correctly. In this case, set the settings to lower value.
External Display
62
z When you use the simultaneous display, DVD-Video, MPEG files and other motion image files may not be played back smoothly.
z Carefully read the instruction manual of the external display.
When connecting an external analog display that does not conform to the Plug & Play standards, select the display driver accordingly in the following menu, or use the driver disc supplied with the monitor.
A
(Start) - [Control Panel] - [Adjust screen resolution] - [Advanced Settings] - [Monitor] - [Properties].
• A standard user needs to enter an administrator password.
B
Click [Driver] - [Update Driver].
Click [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Monitor] - [Properties] -
[Driver] - [Update Driver].
z Display switching does not work when [Command Prompt] screen is set to “Full Screen”.
CAUTION
z Before disconnecting the external display, switch to the internal LCD by pressing
displayed image quality may become different after disconnection (e.g., wrong resolution). In this case, press +
or Fn + F3 to reset the image quality.
z The screen may become distorted due to the following operations. In this case, restart the computer.
• Disconnecting an external display for which you have set high resolution or high refresh rate.
• Connecting/disconnecting an external display during computer operations.
*1
*2
Windows XP: standby
Windows 7 only
To switch the Extended Desktop
1
Press
Fn
+
F3
.
2
Select [Extend].
External Display
/
1
Right-click the desktop, and click [Graphics Properties].
[Intel
®
Graphics and Media Control Panel] screen appears.
2
Click [Multiple Displays].
3
Select [Extended Desktop] in [Operating Mode].
4
Make the settings for [Primary Display] and [Second Display].
5
Click [Apply].
6
Click [OK].
63
To Change the Display Settings
1
Right-click the desktop, and click [Graphics Properties].
2
Click [General Settings].
3
Select the display destination.
4
Set the display color and resolution etc.
5
Click [Apply].
6
Click [OK].
NOTE
z It may not be possible to use the extended desktop with some software applications.
z When you click the maximize button, the window is displayed on one of the displays. You cannot move the maximized window to the other display.
z Do not use the display rotation in the extended desktop.
External Display
64
z To switch left (primary device) and right (secondary device), once return the display to “notebook only”. Follow the steps below.
A
Right-click the desktop and click [Graphics Options].
B
Click [Output To] - [Built-in Display].
C
Right-click the desktop and click [Graphics Options].
D
Click [Output To] - [Extended Desktop], and click [Monitor + Built-in Display] (the external display will be set to primary device) or [Built-in Display + Monitor] (the internal LCD will be set to primary device).
z To switch to the Extended Desktop, be sure to use the [Intel
®
Graphics and Media Control Panel] screen. If you use other methods (e.g. display setting, etc.), the screen may not be displayed correctly.
z The pop-up icon displayed by Fn key combination appears only on the primary device.
z Set the internal LCD to the primary device when using the touchscreen (only for model with touchscreen) or dual touch
(only for model with dual touch). The cursor will move on the primary device when you touch the internal LCD.
z You cannot switch the display by pressing Fn+F3.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 Reference Manual(Cover)
- 2 Introduction
- 4 Key Combinations
- 8 Tablet Buttons
- 11 Touchscreen
- 15 Dual Touch
- 19 Software Keyboard
- 21 Hand Writing Utility
- 22 Dashboard for Panasonic PC
- 29 Display Rotation
- 31 Sleep or Hibernation Functions
- 36 Saving Power
- 39 Security Measures
- 42 Battery Power
- 49 Customizing the Power Setting
- 50 PC Card / ExpressCard
- 53 SD Memory Card
- 56 Smart Card
- 58 RAM Module
- 60 Port Replicator / Car Mounter
- 61 External Display
- 65 USB Devices
- 67 IEEE 1394 Devices
- 68 Fingerprint Reader
- 78 Modem
- 81 LAN
- 84 Disabling/Enabling Wireless Communication
- 89 Wireless LAN
- 93 Bluetooth
- 94 Wireless WAN
- 97 Hard Disk Drive
- 99 Flash Memory Drive
- 101 Quick Boot Manager
- 103 Setup Utility
- 114 Icon Enlarger
- 115 Loupe Utility
- 117 Hardware Diagnostics
- 121 Hard Disk Backup/Restore Function
- 124 Recovery Disc Creation Utility
- 126 Hard Disk Data Erase Utility
- 127 Technical Information
- 129 Error Message
- 130 Troubleshooting (Advanced)
- 130 Shut Down
- 130 Display
- 130 Sleep or Hibernation
- 131 Sound
- 133 Keyboard
- 133 Display Rotation
- 134 Network
- 134 Wireless Communication (only for model with wireless LAN/wireless WAN)
- 136 Connecting Peripherals
- 139 Touch Pad / Touchscreen (only for model with touchscreen) / Dual Touch (only for model with dual touch)
- 140 PC Card / ExpressCard (only for model with ExpressCard slot)
- 140 SD Memory Card
- 140 Smart Card (only for model with Smart Card slot)
- 141 Fingerprint Reader (only for model with Fingerprint Reader)
- 144 Fast User Switching Function
- 145 Others
- 146 Checking the Computer’s Usage Status