Water Heater Unit Installation Instructions Alfa Romeo 147 Thermo Top E

Alfa Romeo 147

Heater Unit/Installation Kit

1 or

1

Quantity Description

1 or

Retail Accessories for Thermo Top E Gasoline

Retail Accessories for Thermo Top E Diesel

Retail Accessories for Thermo Top C Gasoline or

1 and

1

Retail Accessories for Thermo Top C Diesel

Installation kit for Alfa Romeo 147 Gasoline and Diesel

Order No.:

See price list

See price list

See price list

See price list

1313097A

Foreword

These installation instructions apply to Alfa Romeo 147 Gasoline and Diesel vehicles - for validity, see page 2 - from model year 2001 and later, assuming technical modifications to the vehicle do not affect installation, any liability claims excluded. Depending on the vehicle version and equipment, modifications may be necessary during installation with respect to these installation instructions.

However, the stipulations in the "installation instructions" and "operating and maintenance instructions" for the Thermo Top C/E must always be observed.

The corresponding rules of technology and any information from the vehicle manufacturer should be observed during the installation work.

General Instructions

Installation should be carried out according to the general, standard rules of technology. Unless specified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring harnesses using cable ties.

Sharp edges should be fitted with edge protectors (split-open plastic hose).

Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No.

111329).

Special Tools

- Torque wrench for 2.0 - 10 Nm

- Hose clamping pliers

1313160A_EN

3