Home Theatre System Operating Instructions HT-RT5

To cancel the Secure Link function

For the Bar Speaker

Select [Off] on Step 3 above.

For the subwoofer or the surround speakers

Press and hold SECURE LINK on the rear of the subwoofer or the surround speakers for several seconds until the on/standby indicator on the subwoofer or the surround speakers turns green or flashes in green.

Be sure to press SECURE LINK with the point of a pen, etc.

Selecting the Frequency Band

[RF Band]

You can select the frequency band.

1

Select [Wireless Sound Connection] in

[System Settings] (page 37).

2

Select [RF Band].

3

Select the setting you want.

• [Auto]: Normally select this. The system automatically selects the strongest frequency band for transmission.

• [5.2GHz], [5.8GHz]: The system transmits sound according to the selected frequency band.

Tip

• We recommend you to set [RF Band] to

[Auto].

Calibrating the

Appropriate Speaker

Settings Automatically

(Auto Calibration)

D.C.A.C. DX (Digital Cinema Auto

Calibration DX) brings you the ideal sound experience by automatically adjusting the setting of the speakers’ distance, location, and acoustic.

Notes

• The system outputs a loud test sound when

[Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors.

• Before [Auto Calibration], make sure that

– the Bar Speaker, subwoofer and surround speakers are turned on

1

Press HOME.

The home menu appears on the TV screen.

2

Press

/ to select

[Setup].

3

Press

/ to select [Audio Settings],

then press .

4

Press

/ to select [Auto

Calibration], then press .

The speaker layout display appears.

5

Connect the calibration mic to the

A.CAL MIC (ECM-AC3) jack on the rear of the Bar Speaker.

Set up the calibration mic at ear level using a tripod, etc. (not supplied). The calibration mic should aim the TV screen. The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic.

6

Press

/ to select [OK], then press

.

To cancel, select [Cancel].

38

GB