M-505USB

Basic function

Demonstration mode

The system is equipped with a demonstration function (only display). When the power cable is plugged in and button is pressed to turn the system on for the fi rst time, the demonstration automatically starts. The demonstration consists of sequential change of display and indicators showing the operations, but the audio itself does not change.

The demonstration function can be cancelled as follows.

To deactivate the demonstration

Press (demo) button on the unit during demonstration.

To activate the demonstration

After turning the power on, press (demo) button on the unit.

⁄

• The demonstration operates automatically when; a power has failed and then recovered, or the plug of the power cable has been pulled out while the power was on and then plugged back in.

Switching the system on

Press , CD/USB (CD/USB), TUNER band (TUNER band), TAPE mode (TAPE mode), AUX (AUX) button.

The standby LED will go out.

The system will switch to the last selected source or the selected source.

Switching the system to standby mode

Press button.

Standby indicator is lit.

Volume control

Press VOLUME UP (turn (volume) knob to the right) button to increase, or press VOLUME DOWN (turn

(volume) knob to the left) to decrease the volume level.

“VOL XX” is displayed. “VOL XX” denotes the volume level.

To switch off the volume temporarily

Press MUTE button.

Playback continues without sound, and the icon

“MUTE” appears on the display.

⁄

• To restore the volume, press MUTE button again or adjust the volume.

Sound control

The sound control system feature enables you to enjoy special sound eff ects; preset equalizer settings and bass enhancement, providing the best music reproduction.

To switch on preset equalizer settings

Press EQ (EQ) button to select the desired sound eff ect: POP, CLASSIC, ROCK, JAZZ or FLAT (off ).

To switch on the bass enhancement

Press X.BASS (X-bass) button. The icon “X-BASS” appears on the display.

⁄

• To switch off X-BASS, press X.BASS (X-bass) button. The icon

“X-BASS” disappears.

• EQ and X-BASS functions are not applied to the recording sound.

Headphones

To listen to your stereo with headphones (separately available), use the 3.5 mm phones jack on the unit.

¤

• Excessive sound pressure from earphones and headphones can cause hearing loss.

10

EN