Components of the transmitter interface. Micro Motion Model 1700 1700

Ensure that all transmitter and sensor covers and seals are closed. Turn on the electrical power at the power supply.

The status LED indicates the status of the transmitter and any active alarms. Green indicates no alarms, yellow indicates low-severity alarms, and red indicates high-severity alarms.

You can use several different communications tools and protocols to interface with the transmitter. For all configuration tools except the display, you must have an active connection to the transmitter.

Characterization is the process of configuring the transmitter to match the specific sensor and application. This may include specifying the sensor type, flow measurement unit, density measurement unit, and other parameters.

You can use ProLink II or ProLink III to verify the zero. This involves checking the flow measurement at zero flow and adjusting the zero point if necessary.