Creating Custom Displays. CRMLS Advanced User Manual
विज्ञापन
विज्ञापन
Custom Displays and Exports
Custom displays and exports allow you to create displays and exports with all of your favorite fields. Follow the steps in these sections to create a custom displays and exports:
• “Creating Custom Displays” below
• “Creating Custom Exports” on page 25
Creating Custom Displays
Follow the steps below to create a custom one line display for viewing and printing listings.
Note:
You can create multiple custom displays for each property type.
1. Click the My Matrix tab.
2. Click the Settings link.
22
Custom Displays and Exports
3. Click Custom Displays.
4. Select a property type in the Table drop-down list, then click the Add button.
Note:
Use the Edit, Copy, and Delete buttons to manage existing custom displays. You can also change the sort order of the custom displays by selecting the display and clicking the Move Up or Move
Down buttons.
Creating Custom Displays
23
3. Enter the Display Name for the custom display.
5. Select a field in the Available Columns list, then click the Add button to add them to the
Selected Columns list.
If you need to remove a fields from the Selected Columns list, select the column and click the Remove button.
Note:
To re-order the columns, select a column and use the Up and Down buttons.
6. To change the Label, width, or alignment of a column, select the column in the Selected
Columns list and make changes to the Label, Pixel Width, and Alignment fields as necessary.
Note:
You may need to increase the Width of some of the field to prevent information from being cutting off in your custom display (96 pixels is approximately equal to one inch).
24
Creating Custom Displays
डाउनलोड
विज्ञापन