Blaupunkt NEW ORLEANS 220 User Manual

Sound settings

Sound settings

The following sound settings can be changed in the "AUDIO" menu:

• Setting the left/right volume distribution

(Balance) or front/rear (Fader)

• Adjusting the increase of bass at low volume

(Loudness)

• Adjusting the equalizer

Calling and exiting the "AUDIO" menu

쏅 Press the AUDIO button

6

to open the

"AUDIO" menu.

쏅 Turn the rotary/pushbutton 

=

until the desired menu item is selected.

쏅 Perform the setting (see the next section).

쏅 Press the AUDIO button

6

to exit the menu.

Notes:

• The menu is automatically exited approx.

20 seconds after the last button activation and you are returned to the display of the current audio source.

• In the menu, you can press the  button

<

in each case to return to the higher menu level.

• The menu does not allow changing the volume or muting (Mute) the car sound system.

FADER

Front/rear volume distribution. Settings: REAR 7 to FRONT 7.

쏅 Press the rotary/pushbutton =

to change the setting.

쏅 Turn the rotary/pushbutton  =

until the desired volume distribution is set.

LOUDNESS

Adjustable increase of bass at low volume.

Settings: 400/800/2400 Hz and OFF (no increase).

쏅 Press the rotary/pushbutton

=

to change the setting.

쏅 Turn the rotary/pushbutton =

to change between the settings.

Adjusting the equalizer

The radio features a 3-band equalizer. For each of the three treble, middle and bass bands, you can select a frequency as well as adjust the level. In addition, you can adjust the quality factor for bass and middle.

In addition, the equalizer off ers sound presettings for diff erent types of music.

Making settings in the "AUDIO" menu

BALANCE

Left/right volume distribution. Settings: LEFT 7 to

RIGHT 7.

쏅 Press the rotary/pushbutton

=

to change the setting.

쏅 Turn the rotary/pushbutton  =

until the desired volume distribution is set.

Setting the 3-band equalizer

쏅 In the "AUDIO" menu, select the "EQ" menu item.

쏅 Press the rotary/pushbutton

=

to open the

"EQUALIZER" menu.

쏅 In the "EQUALIZER" menu, select the "USER" menu item.

쏅 Press the rotary/pushbutton =

to open the menu.

쏅 Turn the rotary/pushbutton

=

to change between the following menu items:

– BASS-G (level)

(settings: –7 to +7)

– BASS-F (frequency)

(settings: 60/80/100/200 Hz)

– BASS-Q (Q-factor)

(settings: 1.0/1.25/1.5/2.0)

13