Quidway S9300 Terabit Routing Switch
Configuration Guide - IP Service 3 DHCP Configuration
Run the display dhcp server group group-name command to view the configuration of DHCP server group group1. If the similar information is displayed, the configuration succeeds.
<Quidway> display dhcp server group group1
Group-name : group1
(0) Server-IP : 100.10.10.1
(1) Server-IP : 100.10.10.2
Gateway : --
VPN instance : --
3.6 Maintaining DHCP
After DHCP configurations are complete, you can clear DHCP statistics and monitor DHCP operation.
3.6.1 Clearing DHCP Statistics
During routine maintenance, you can use the reset commands to clear the statistics about the specified DHCP server group.
Context
CAUTION
DHCP statistics cannot be restored after they are cleared. Exercise caution when running the reset commands.
Procedure
l To clear DHCP server statistics, run the reset dhcp server statistics command in the user view.
l To clear DHCP relay agent statistics, run the reset dhcp relay statistics command in the user view.
----End
3.6.2 Monitoring DHCP Operation
During routine maintenance, you can use the following commands in any view to monitor DHCP operation status.
Procedure
Issue 01 (2011-10-26) l Run the display dhcp relay { all | interface interface-type interface-number } command to view the DHCP server group on a VLANIF interface and the servers in the DHCP server group.
l Run the display dhcp relay statistics command to view packet statistics on the DHCP relay agent.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71
