802.11g Wireless Four Port Ethernet ADSL2+ Router

4. Configure Wireless ADSL2+ Router via HTML

This device supports a Web-based (HTML) GUI to allow users to configure Router setting via Web browser.

4.1 Login

1) Launch the Web browser.

2) Enter the default IP address

http://192.168.1.1

3) Entry of the username and password will be displayed. Enter the default login

User Name and Password: z The default login User Name of the administrator is

admin

, and the default

login password is

admin

.

21

4.2 Navigating the Web Configurator

Steps to navigate the Web configuration from the Site Map are summarized as below.

Steps to navigate the Web configuration from the Site Map are summarized below.

¾ Click

¾ Click

¾ Click Advanced Setup to configure advanced features.

¾ Click

¾ Click firmware and to run diagnostic tests on the router

¾ Click

¾ Click Help to see available help topics.

22