To check that update is successful. HP StoreOnce VSA

Below you will find brief information for StoreOnce VSA. This document describes how to deploy the HP StoreOnce VSA using vSphere Client or Hyper-V Manager. It also describes how to add storage and apply a purchased license. You can also find information about supported datastores, supported server and network adapter configurations, and NUMA settings. This guide is frequently updated, so it is recommended to check for the latest version.

PDF

Document

To check that update is successful

Wait for the system to reboot.

NOTE: Depending upon the updates, this could take 10 minutes or longer.

Once access returns to the Management interface, check that the process has completed successfully, as follows:

•

From the StoreOnce CLI: Use system show packages to check that all packages are now

Installed

. You should see this line in the output of system show packages:

D2D_Master-734561-B21-3.11.0-1411.2.x86_64.rpm installed

•

From the GUI: Check on the StoreOnce screen, to ensure that the software revision number has updated to software version D2D_Master-734561-B21-3.11.0-1411.2.

•

From the GUI: Check the Event log for a confirmation message of the software upgrade:Update

D2D_Master-734561-B21-3.11.0-1411.2 completed successfully

To activate licenses

On upgrade from VSA 1.x to 2.0, the existing 3–year support license is removed from the StoreOnce

VSA. It is recommended that the Instant-On license is applied in the first instance and any remaining time on the existing license can be re-instated as described below.

After a successful software update the StoreOnce VSA reboots.. When the services come up, log into the StoreOnce CLI and run the StoreOnce CLI command, license add demo.

This command enables a 60 day all-in-one Instant-On license, as described in

Licensing (page 15)

During the 60 day period, contact the HP Webware licensing portal with the serial number of the StoreOnce VSA. A product license key is provided, which will enable the StoreOnce

VSA for the remaining length of the 3–year license term. See

To redeem a putchased license (page 16)

for more information about redeeming and activating licenses.

52 Software update on VSA 1.x to VSA 2.0