SCP3100NZ060529qxd 06.5.29 1:28 PM Page 5
Viewing the Display Screen
This list identifies the symbols you’ll see on your phone’s display screen: shows your current signal strength. The more lines you have, the stronger your signal.
means your phone cannot find a signal.
indicates the call is on hold.
tells you a call is in progress.
indicates the Push 2 Talk service is enabled.
indicates the Push 2 Talk service is enabled and the speakerphone mode is set to on.
indicates the Push 2 Talk service is disabled.
indicates Internet/Push 2 Talk access is inactive.
indicates Internet/Push 2 Talk access is active.
indicates Internet/Push 2 Talk access is disabled.
indicates you are in Roaming Service area.
indicates you have new voicemail messages.
indicates you have new text messages.
indicates you have new picture messages.
indicates you have new voicemail messages and text messages.
indicates you have new picture messages, voicemail messages and text messages.
shows the level of your battery charge. The more black you see, the more power you have left. (Icon is animated while charging) shows your battery is charging in “Power Off” state.
indicates you have menus to scroll (in four directions).
indicates the vibrate feature is set.
indicates volume level 4 or 1 and vibrate feature are set.
indicates 1 beep feature is set.
indicates the voice call ringer setting is off.
indicates all the sound settings are off.
indicates the Location Service of your phone is enabled.
1. The Basics 5
SCP3100NZ060529qxd 06.5.29 1:28 PM Page 6 indicates the Location Service of your phone is disabled.
indicates you have a new screen call message.
indicates the Screen Call Auto setting is on.
indicates the Alarm Clock is on.
indicates your phone is in TTY mode.
indicates the speakerphone mode is set to on.
indicates Headset mode is set to Push 2 Talk and a headset is connected.
6 1. The Basics