advertisement
4. Press the Menu key until Graphic: LPI appears in the window.
5. Press the Enter key to enter the LPI menu.
6. Press the Menu key until LPI: 85 lines/in appears.
7. Press the Enter key to select 85 as the default.
8. Press the Online key. Ready appears in the window.
Browser Utilities Access
You can monitor, control, and confi gure features using your platemaker’s internal web browser.
Accessing the Browser Utilities
The platemaker must have a valid IP address before you can use the browser utilities.
To access your platemaker browser utilities options:
1. Turn on your platemaker and the computer.
2. Open your browser and enter your platemaker IP address. The
PlateMaker 6 Home Page appears.
If you are not sure of the current address, check the platemaker front panel either under the Ready message or under Network:
IP Address.
34 PlateMaker 6 User’s Guide
PlateMaker 6 Home Page
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- High-resolution laser scanner for sharp, detailed images
- Durable construction for long-lasting performance
- Variety of software features for easy use and customization
- Generates a small amount of ozone gas during image transfer in the printing process
- Invisible laser beam inside the platemaker’s scanner unit can cause permanent eye damage
Related manuals
Frequently Answers and Questions
What is the power consumption of the PlateMaker 6?
What type of power cord is required for the PlateMaker 6?
What are the FCC regulations for the PlateMaker 6?
advertisement