- No category
advertisement
Chapter 2: Unpack the Device
ELECTROSTATIC ALERT:
!
ELECTROSTATIC ALERT:
Wear an anti-static wrist ground strap whenever you handle components of a
C360. Connect the strap to an approved ground, such as an unpainted metal surface.
Equipment
Open the box that contains the C360, and ensure that it contains the following components and accessories:
●
●
One Avaya C360 Switch.
One Accessory Kit that contains:
One 115V 3 Wire
Power Cable
One RJ45 to RJ45
Flat Cable
Issue 2 September 2005 13
Unpack the Device
One RJ45 to DB9F
Adapter
One DB25M Adapter
Two (2) 19"
Rackmount Brackets
Nine (9) M4 Flat
Head Screws
Four (4) 5/16" Round
Head Screws
14 Quick Start for Hardware Installation: The Avaya C360 Converged Stackable Switch
Documentation
Four (4) Washers
Four (4) stand-off feet
Documentation
●
●
●
Avaya C360 Documentation and Utilities CD
Release Notes
Quick Start for Hardware Installation Avaya C360 Converged Stackable Switches (this document), 10-300616
Issue 2 September 2005 15
Unpack the Device
16 Quick Start for Hardware Installation: The Avaya C360 Converged Stackable Switch
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 Quick Start for Hardware Installation
- 1 Avaya C360 Converged Stackable Switches
- 5 Chapter 1: Before you Start
- 5 Gathering Information
- 5 Defining the Installation
- 5 Preparing Contacts you might need
- 6 Preparing Installation Files
- 6 Preparing Needed Tools
- 6 Choosing the Installation Site
- 8 Building a stack
- 10 Stack Master election rules
- 13 Chapter 2: Unpack the Device
- 13 Equipment
- 15 Documentation
- 17 Chapter 3: Mount the Device
- 17 Rack Mounting (Optional)
- 18 Before you Install the C360 in a Rack
- 19 Wall Mounting (Optional)
- 21 Chapter 4: Power Up
- 22 Connecting to an AC Power Supply
- 22 AC Power Cable
- 23 Connecting a BUPS
- 24 Supplemental Earthing of the C360 (Optional)
- 24 Post-Installation
- 25 Chapter 5: Prepare for Configuration
- 25 Establishing a Console Connection
- 26 Assigning a C360 IP Stack Address
- 27 Establishing a Telnet Connection
- 28 Configuring the Switch
- 28 Avaya C360 Default Settings
- 31 Chapter 6: Device Manager
- 31 Overview
- 31 System Requirements
- 32 Configuring the Device Manager
- 32 Device Manager Commands
- 32 Running the Device Manager
- 34 Installing the Java Plug-in
- 34 Installing from the C360 Documentation and Utilities CD
- 35 Install from the Avaya Web Site
- 35 Install from your Local Web Site
- 35 Installing the On-Line Help and Java Plug-In on your Web Site
- 36 Documentation