advertisement
Introduction
Thank you for purchasing the Composer LCR In-Wall Speaker.
At Origin Acoustics, we take pride in providing you with a high quality product. All of Origin Acoustics’ speakers are designed to have excellent sound quality, longevity, and a simple installation process.
This instruction booklet covers the necessary information for a smooth installation of your Composer, including: the tools you will need, step-by-step instructions for installation, troubleshooting tips for any errors that may occur, and all warranty information. If for any reason you experience problems or if you have installation questions please call us at (844) 674-4461. Hours of operation are
8:00am to 5:00pm (Pacific Time), Monday through Friday.
2
Installation Requirements and Recommendations
What’s included
• Template • Speaker
SpringLock
Release
• Grille
SpringLock
Tweeter
Bass/Treble
Control
Left Woofer
Right
Woofer
SpringLock
Release
Figure 2.1: Speaker
844·674·4461
4
3
COMPOSER LCR SERIES INSTRUCTION MANUAL
Required Tools/Items
1. Keyhole or drywall saw
2. Speaker wire
3. Pencil
4. Wire stripper
5. Measuring tape
1
2
Speaker Wire
Recommendations
For this setup, use a multi-stranded wiring designed for amplifier to speaker connections. The gauge of wire used can have an impact on the performance of your speakers and we would recommend that you choose the largest wire size that is practical for your installation.
Which gauge to select depends on the length of wire to be used on any particular speaker. In general the shorter the run the smaller the wire size you can use, however you can never go wrong by using a thicker gauge.
5
Wire Length
Feet Meter
Recommended Gauge
0-100 0-30 16
50-150 15-45 14
100+ 30+ 12
Figure 3.1: Tools
Optional Tools/Items
• Drill with ⅛” (33 mm) drill bit
• Stiff wire (like from a coat hanger)
• Stud finder
• Fish tape
• Can of spray paint
• Can of compressed air
To check for obstacles in wall
To check for obstacles in wall
To check for obstacles in wall
To route wire through walls
For painting the grille
For painting the grille
WWW.ORIGINACOUSTICS.COM
3
advertisement
Related manuals
advertisement
Table of contents
- 3 Introduction
- 3 Installation Requirements and Recommendations
- 3 What’s included
- 3 Required Tools/Items
- 3 Optional Tools/Items
- 4 Speaker Placement
- 4 3.1
- 4 5.1
- 4 7.1
- 5 Installation
- 5 1) Installing the Wire
- 6 2) Painting the Grille
- 6 3) Cutting the Hole
- 6 4) Connecting the Wires
- 7 5) Installing the Speaker
- 7 7) Listening Test and Adjustments
- 7 8) Installing the Grille
- 8 Troubleshooting
- 8 Technical Assistance
- 9 Specifications
- 10 Warranty
- 10 Requirements and Warranty Coverage
- 10 Return Process