Cable Box. RCA NiteGlo RCU4GLW, RCU 4 GLW, UNIVERSELLE SYSTEMLINK 3

Programming Your Universal Remote For Cable Box

1. Manually turn on the Cable Box.

2. Press and hold the

CODE SEARCH

button until the

INDICATOR LIGHT

lights, then release the

CODE SEARCH

button.

3. Press and release the

CABLE

button

(the

INDICATOR LIGHT

will blink then remain lit).

BLINK/ON

4. Find the three digit code for your Cable Box in the code list starting on the following page and enter it using the Number Buttons.

After your code is entered, the

INDICATOR LIGHT

will turn off.

5. Aim the remote at your Cable Box and press the

POWER

button. Your Cable Box should turn off.

Note: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 11.

6. With your Cable Box on, press

CHANNEL UP

. If the Cable Box responds, no further programming is required.

OFF

CABLE BOX CODE

7. Enter your code here for easy reference.

8