Creating MMU Configuration
•
Saving MMU Configuration
•
MMU Configurator View
12.1 Creating MMU Configuration
In order to use the MMU Configurator, you need to create an MMU configuration.
Follow these steps to create the configuration:
1. From the CodeWarrior IDE menu bar, select File > New > Other.
The New wizard starts, displaying its Select a wizard page.
2. Expand the Peripheral Configurators tree control and select MMU Configuration
File (
Figure 12-1 ).
Figure 12-1. Select a wizard Page of New Wizard
3. Click Next.
The New wizard closes and the MMU Configurator Wizard starts, displaying its
MMU Configurator File page.
4. In the Container text box, type the path of the directory where you want to store the
MMU configuration, or click Browse to find and select the new file container.
CodeWarrior Development Studio for StarCore 3900FP DSP Architectures Targeting Manual, Rev. 10.9.0,
11/2015
316 Freescale Semiconductor, Inc.
Chapter 12 Memory Management Unit Configurator
5. In the File name text box, type the name of the MMU configuration, or leave the default name intact.
NOTE
If you enter a new name, ensure to preserve the
.mmu
file extension.
6. Expand a tree control in the Device Number group.
7. From the expanded list, select the target hardware for which you want to create the
MMU configuration. For example,
B4860
( Figure 12-2
).
Figure 12-2. MMU Configurator File Page of MMU Configurator Wizard
8. Click Finish.
NOTE
When started in the offline mode, the MMU Configurator fills in the required defaults for all fields.
CodeWarrior Development Studio for StarCore 3900FP DSP Architectures Targeting Manual, Rev. 10.9.0,
11/2015
Freescale Semiconductor, Inc.
317
