WARNING NOTICES. Hills HILLS series, Series LCD Code Pad

Hills Series LCD Code Pad is a user-friendly security device designed to protect your premises. With its advanced features, you can effortlessly arm and disarm the system, bypass zones, and modify settings. Whether you're at home or away, the code pad offers customizable arming modes like Full Arm and Partial Arm for tailored protection.

WARNING NOTICES

This product is to be installed by qualified SERVICE PERSONNEL only

The equipment should only be operated with an approved power adapter with insulated live pins.

CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF BATTERIES ACCORDING TO THE

INSTRUCTIONS. CONTACT YOUR INSTALLER FOR REPLACEMENT

BATTERIES.

When installed as directed, this product conforms to the standards set by Standards Australia on behalf of the Australian

Communications Authority (ACA).

007573417

Hills LED Keypad User Manual

Related manuals

Frequently Answers and Questions

What does the armed light indicate?

When the armed light is on, the system is armed. When it's off, the system is disarmed.

What does the bypass light indicate?

The bypass light is on when any zone in the code pad's area is bypassed. The bypassed zones will also be illuminated.

How do I arm the system in the ON Mode?

Close all protected doors and windows, wait for the ready light to turn on, then enter your 4-digit user code.

What does the exit light indicate?

The exit light turns on during the exit delay and flashes rapidly for the last 10 seconds of the delay.

What does a flashing zone light indicate?

A flashing zone light means that the zone is in alarm or has been faulted.

Download PDF