advertisement
English
Filter Shape
The filter may be configured to have a low-pass (LP), band-pass (BP) or hi-pass (HP) characteristic with the Shape button
30
. The Slope button
31
sets the degree of rejection applied to out-of-band frequencies; the 24 dB position gives a steeper slope than the 12 dB; an out-of-band frequency will be attenuated more severely with the steeper setting.
Cutoff
Frequency
Cutoff
Frequency
Volume
Volume
Volume
Frequency
Low Pass 12 dB
Centre
Frequency
Volume
Frequency
Low Pass 24 dB
Centre
Frequency
Volume
Frequency
Band Pass 12 dB
Cutoff
Frequency
Volume
Frequency
Band Pass 24 dB
Cutoff
Frequency
Frequency
High Pass 12 dB
Frequency
High Pass 24 dB
Frequency
The large rotary Frequency control
32
sets the filter cut-off frequency when Shape is set to HP or LP. With a band-pass filter configured, Frequency sets the centre frequency of the passband.
Sweeping the filter frequency manually will impose a “hard-to-soft” characteristic on almost any sound.
77
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 COPYRIGHT AND LEGAL NOTICES
- 6 INTRODUCTION
- 7 Key Features
- 7 About This Manual
- 8 What’s In The Box
- 9 Registering your Circuit Mono Station
- 9 Power Requirements
- 10 Glossary
- 13 HARDWARE OVERVIEW
- 13 Top View – controls
- 18 Rear View – connectors
- 19 Front and side views
- 20 BASICS
- 20 Powering the unit on
- 21 Getting started
- 21 The demo Sessions
- 22 Loading and Saving Sessions
- 26 Synth section - basics
- 26 Paraphonic voicing
- 27 Tracks
- 27 Note View
- 28 Dual View
- 29 Expanded Note View
- 30 Scales
- 31 Scale selection
- 32 Root note
- 33 Selecting Patches
- 34 Patch Preview
- 34 Initial Patch
- 35 Programming a Pattern
- 35 Step editing
- 36 Deleting notes
- 37 Inserting notes
- 37 Other note alterations
- 37 Clear and Duplicate
- 37 Clearing Steps
- 38 Duplicating Steps
- 38 Velocity, Gate and Glide
- 38 Velocity
- 42 Glide
- 44 The Modulation Sequencer
- 45 Smooth
- 45 Recording a Pattern in real time
- 46 Pattern Settings
- 47 Pattern direction
- 47 Pattern length
- 48 Pattern Sync Rate
- 50 STORING PATTERNS
- 50 Patterns View
- 51 Clearing Patterns
- 52 Duplicating Patterns
- 52 Pattern Chains
- 53 Pattern Octave
- 54 Mutate
- 55 TEMPO AND SWING
- 55 Tempo
- 55 External clock
- 56 Swing
- 57 Swing sync
- 58 Automation of Knobs and Sliders
- 59 SYNTHESIS TUTORIAL
- 71 SYNTHESISER SECTION
- 71 Sound modification
- 71 LED parameter indicators
- 71 The Filter knob
- 71 Pitch and Mod wheels
- 71 External control
- 72 Synthesiser Block Diagram
- 73 The Oscillator section
- 73 Waveform
- 73 Pitch
- 73 Pulse Width
- 74 Oscillator Sync
- 74 The Sub Oscillator
- 74 Noise
- 74 The Ring Modulator
- 75 The Mixer section
- 76 External Input
- 76 The Filter section
- 77 Filter Shape
- 77 Frequency
- 78 Filter Key Tracking
- 79 Overdrive
- 79 The Envelope section
- 81 The LFO section
- 81 LFO Waveforms
- 81 LFO Rate
- 81 LFO Sync
- 82 The Modulation Matrix
- 83 Matrix assignment
- 85 The Distortion section
- 86 SYSTEM SETTINGS
- 86 MIDI I/O
- 86 MIDI Tx/Rx
- 87 MIDI Channel
- 87 Analogue Clock Rates
- 88 Pot Pickup
- 89 SESSION SWITCHING
- 89 Clearing Sessions
- 90 APPENDIX
- 90 Firmware Updates
- 90 Bootloader Mode
- 91 Initial Patch Parameters
- 92 Session loading problems