Step 4: Performing the
Easy Setup
Before performing Step 4
Make sure all connections are secure, and then connect the AC power cord (mains lead).
Follow the Steps below to make the basic adjustments and network settings for the system.
Displayed items vary depending on the country model.
1
Insert two R6 (size AA) batteries
(supplied) by matching the 3 and #
ends on the batteries to the markings inside the compartment.
2
Turn on the TV.
3
Press [/1.
4
Switch the input selector on your TV so that the signal from the system appears on the TV screen.
The Easy Setup Display for OSD language selection appears.
5
Perform [Easy Initial Settings]. Follow the on-screen instructions to make the basic settings using
C/X/x/c and
.
C/X/x/c
Depending on the connection method
(page 17), perform the following setting.
• HDMI cable connection: Follow the instructions that are displayed on the TV screen.
• Video cord connection: Select [16:9] or
[4:3] so that the picture is displayed correctly.
6
After completing of [Easy Initial
Settings], perform [Easy Network
Settings]. Press
C/X/x/c to select [Easy
Network Settings], then press .
The Easy Network Settings display appears.
7
Follow the on-screen instructions to make the network settings using
C/X/x/ c and
.
If the system cannot connect to the network, see “Network connection” (page 51) or
“Wireless LAN connection” (page 51).
To recall the Easy Initial Settings display/Easy Network Settings display
1
Press HOME.
2
The home menu appears on the TV screen.
Press
C/c to select
[Setup].
3
Press
X/x to select [Easy Setup], then
press .
4
Press
X/x to select the setting, then
press .
• [Easy Initial Settings]
• [Easy Network Settings]
The Easy Initial Settings display/Easy
Network Settings display appears.
21
GB