Location. Hoshizaki EF2A-FS, EF1A-FS, ER2A-FS, ER1A-FS

Location

WARNING

• This appliance is not intended for outdoor use.

1. Place the cabinet on a surface solid enough to prevent vibration and strong enough to support the combined weight of the cabinet and the product load. Quick guideline: Estimate 35 pounds per cubic foot of storage space.

2. Cabinets should never be placed in front of windows or glass doors where sunlight will be in direct contact with the units. If a cabinet is located near a window or glass door, provide an adequate shade to block the sun´s rays.

3. Ambient temperature must be between 45°F and 90°F. Low ambient temperatures below 45° F are as harmful as high ambient temperatures. Extreme temperatures will definitely affect the performance of the cabinet.

4. Failure to properly level the cabinet could hinder proper drainage and door operation. Leveling legs are provided with the cabinets. Level the cabinet by using the adjustable portion of the leveling legs as needed.

5. Clearance: Leave a space of at least 8” between the back of the cabinet and the wall to provide adequate air circulation of the unit compartment.

8”

Remove the Crate and Skid

1. Remove the external packaging (corrugated board and plastic wrapping). Check for concealed damage. If any damage is identified, immediately forward a complaint to the transportation company.

2. Move the cooler to its final location, before removing the skid.

3. Using a screwdriver remove the screws that attaches the skid to the appliance.

Screw

11