advertisement
Quality of Service
For conversion between two different speeds, the device is featured with powerful Quality of Service
(QoS) function which can classify the priority for received network frames based on the ingress port and frame contents. Furthermore, many service priority policies can be configured for egress operation.
Web Management
The device is embedded with an Http server which provides management functions for advanced network functions including Port Control, Quality of Service, and Virtual LAN functions. The management can be performed via Web browser based interface over TCP/IP network.
1.1 Features
z z z z z z z z z z z z
Basic functions
z
Provides tri-speed 10/100/1000Mbps copper to 1000Mbps fiber conversion
Provides mini-GBIC SFP design for the fiber port to accommodate any type of SFP fiber transceiver when needed.
Support full wire speed Gigabit copper to Gigabit fiber conversion
The copper port supports auto-negotiation and auto-MDI/MDI-X detection
Copper port auto-negotiation mode, speed and duplex configuration by DIP switch settings
Link Fault Pass Through function allows link fault status passes through between copper link and fiber link transparently.
Far End Fault function on fiber port
Supports 802.3x flow control for full-duplex and backpressure for half-duplex
Supports loopback test between two devices over fiber link
Supports remote twisted-pair status monitoring
Diversified mounting support : desktop, wall, center rack, and optional Din-Rail support
Center chassis installation : support installation in a center chassis rack with benefits of central software management and redundant power backup.
Support wide range of fiber options : multimode fiber, single mode fiber (short reach up to long reach), Bi-directional single fiber, and CWDM
Management functions
z z
Port configuration control and status monitoring
Supports Jumbo frame conversion z z
Packet filtering
802.1Q Control between two ports z z z z z
Quality of Service (QoS) control for packet traffic
Supports loopback test
Supports remote twisted-pair status monitoring
In-band embedded firmware upgrade function
Web-based browsing interface
-7-
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 1. Introduction
- 7 1.1 Features
- 8 1.2 Product Panels
- 8 1.3 Specifications
- 11 2. Installation
- 11 2.1 Unpacking
- 11 2.2 Safety Cautions
- 12 2.3 Mounting the Media Converter
- 13 2.4 Applying Power
- 14 2.5 Making UTP Connections
- 15 2.6 Making Fiber Connection
- 16 2.7 Loopback Test Push Button
- 17 2.8 Configuration DIP SW
- 18 2.9 LED Indication
- 19 2.10 Configuring IP Address and Password for the Device
- 20 3. Functions
- 20 3.1 Abbreviation
- 20 3.2 Converter Function
- 21 3.3 Link Fault Pass Through Function
- 22 3.4 Remote TP Status Monitoring Function
- 23 3.5 802.1Q Control Function
- 25 3.6 QoS Function
- 26 3.6.1 Packet Priority Classification
- 26 3.6.2 Priority Class Queues
- 26 3.6.3 Egress Service Policy
- 27 3.7 SNMP Trap Function
- 28 4. Web Management
- 28 4.1 Start Browser Software and Making Connection
- 28 4.2 Login to the Device Unit
- 29 4.3 Main Management Menu
- 30 4.4 System
- 32 4.4.1 Management VLAN
- 33 4.5 Ports
- 36 4.5.1 802.1Q Filtering
- 37 4.5.2 802.1p Mapping
- 38 4.5.3 DSCP Mapping
- 39 4.6 Statistics
- 40 4.7 Loopback Test
- 40 4.8 Reboot System
- 40 4.9 Restore Default
- 41 4.10 Update Firmware
- 41 4.11 Logout
- 42 Appendix A. Factory Default Settings
- 44 Appendix B. Models & Optical Specifications