Nokia 6700 classic User Guide

Settings

● Call duration display — to display the duration of the call in progress

● Summary after call — to briefly display the approximate duration after each call

● Send my caller ID — to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by

network.

● Outgoing call line — to select the phone line for making calls, if your SIM card supports multiple phone lines

(network service)

Phone

Select Menu > Settings > Phone and from the following:

● Language settings — to set the language of your phone, select Phone language and a language. To set the language of your phone according to the information on the SIM card, select Phone language > Automatic.

● Memory status — to check the memory consumption

● Automatic keyguard — to lock the keypad automatically after a preset time delay when the phone is in the home screen mode and no function has been used

● Security keyguard — to ask for the security code when you unlock the keyguard

● Sensor settings — to activate and adjust the tapping function

● Voice recognition —

See "Voice commands", p. 34.

● Flight query — to be asked whether to use the flight mode when you switch the phone on. With the flight mode, all radio connections are switched off.

34

● Phone updates — to receive software updates from your service provider (network service). This option may not be available, depending on your phone.

See "Software updates over the air", p. 35.

● Network mode — to use both the UMTS and the GSM network. You cannot access this option during an active call.

● Operator selection — to set a cellular network available in your area

● Help text activation — to select whether the phone shows help texts

● Start-up tone — to play a tone when you switch the phone on

Voice commands

Call contacts and use your phone by speaking a voice command.

Voice commands are language-dependent. To set the language, select Menu > Settings > Phone > Language

settings > Phone language and your language.

To train the voice recognition of your phone to your voice, select Menu > Settings > Phone > Voice recognition >

Voice recog. training.

To activate a voice command for a function, select Menu >

Settings > Phone > Voice recognition > Voice

commands, a feature, and the function. indicates that the voice command is activated.

To activate the voice command, select Add. To play the activated voice command, select Play.

© 2009 Nokia. All rights reserved.