Portable DVD Player

Setting up the Player

The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc.

AV output Connections

Depending on your TV and other equipment there are various ways you can connect the unit. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information.

AV output Connections to Your TV

1. Set the Mode selection menu to “USB” or “ DISC” mode.

2. Connect the black end of supplied AV cable to the AV IN/OUT jack on the unit.

3. Connect the yellow end of supplied AV cable to the VIDEO

Input jack on your TV.

4. Connect the red and white ends of supplied AV cable to the

AUDIO Input jacks on your TV.

NOTE

Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system.

Rear of TV

Right side of unit

Audio/Video cable

(Supplied)

35