B Port reference
The following sections list the ports used by HPDM:
●
HPDM Console ports
●
HPDM Server ports
●
HPDM Gateway ports
●
HPDM Agent ports
●
Repository ports
HPDM Console ports
Table B-1 HPDM Console ports (inbound)
Receiver port
Sender Receiver
5500
5900
40004
SSL VNC Proxy
(bundled with HPDM
Console)
VNC Viewer (bundled with HPDM Console)
SSL VNC Proxy
(bundled with HPDM
Agent)
VNC Viewer (bundled with HPDM Console)
SSL VNC Proxy
(bundled with HPDM
Console)
VNC Proxy (bundled with HPDM Console)
Protocol Purpose
TCP
(loopback)
VNC Viewer in Listen Mode (reverse
VNC)
TCP
(loopback)
VNC Viewer in Listen Mode (reverse
VNC)
TCP SSL VNC Proxy in Listen Mode (reverse
VNC)
Table B-2 HPDM Console ports (outbound)
Receiver port
Sender Receiver
20 & 21 HPDM Console FTP server (third-party software)
Protocol
TCP
22
137
138
HPDM Console
HPDM Console
HPDM Console
SFTP server (third-party software)
TCP
NetBIOS Name Service UDP
NetBIOS Datagram
Service
UDP
Purpose
These are the default ports for FTP (used for repositories). Port 20 is for data transfer and port 21 is for listening to commands. FTP ports can be configured via the HPDM Console. If you do not use the default ports for your FTP server, please configure the firewall appropriately.
This is the default port for SFTP (used for repositories). SFTP ports can be configured via the HPDM Console. If you do not use the default port for your SFTP, please configure the firewall appropriately.
Allows NetBIOS Name Resolution
Allows NetBIOS Datagram transmission and reception
HPDM Console ports 85
Table B-2 HPDM Console ports (outbound) (continued)
Receiver port
Sender Receiver
139 HPDM Console
445
989 & 990
1099
5500
HPDM Console
HPDM Console
HPDM Console
Protocol Purpose
NetBIOS Session
Service
Microsoft Directory
Services
FTPS server (third-party software)
HPDM Server
VNC View (bundled with
HPDM Console)
TCP
TCP
Allows NetBIOS Session Services connections
For File and Printer Sharing to allow
Server Message Block transmission and reception through Named Pipes
TCP
TCP
TCP
(loopback)
These are the default ports for FTPS
(used for repositories). Port 989 is for data transfer and port 990 is for listening to commands. FTPS ports can be configured via the HPDM Console. If you do not use the default ports for your FTPS server, please configure the firewall appropriately.
Allows the HPDM Console to query the
RMI Registry
VNC Viewer in Listen Mode (reverse
VNC)
5900
40002
40004
SSL VNC Proxy
(bundled with HPDM
Console)
VNC Viewer (bundled with HPDM Console)
HPDM Console
SSL VNC Proxy
(bundled with HPDM
Console)
VNC Proxy (bundled with HPDM Console)
HPDM Server
VNC Proxy (bundled with HPDM Agent)
TCP
(loopback)
TCP
VNC Shadow
TCP
Allows the HPDM Console to call remote objects on the HPDM Server by RMI
Port for SSL VNC connection
HPDM Server ports
Table B-3 HPDM Server ports (inbound)
Receiver port
Sender Receiver
1099 HPDM Console HPDM Server
40002
40005
40006
40009
HPDM Console
HPDM Gateway
HPDM Server
HPDM Agent
Protocol Purpose
HPDM Server
HPDM Server
PostgreSQL (bundled with HPDM Server)
HPDM Server
TCP
TCP
TCP
TCP
(loopback)
TCP
Allows the HPDM Console to query the
RMI Registry
Allows the HPDM Console to call remote objects on the HPDM Server by RMI
Allows the HPDM Gateway to send reports to the HPDM Server
The default database PostgreSQL listening port (only needed when
PostgreSQL is used)
Allows the HPDM Agent to send resource information (CPU, RAM, disk I/O, network
I/O, processes, etc.) to the HPDM Server.
The HPDM Server will send a stop process command to the HPDM Agent.
86 Appendix B Port reference
Table B-4 HPDM Server ports (outbound)
Receiver port
Sender Receiver
40000 HPDM Server HPDM Gateway
40003
40006
40012
HPDM Server
HPDM Server
HPDM Server
HPDM Server
PostgreSQL (bundled with HPDM Server)
Master Repository
Controller
Protocol Purpose
UDP
TCP
TCP
(loopback)
TCP
Allows the HPDM Server to poll the
HPDM Gateway
Allows the HPDM Server to send tasks to the HPDM Gateway
The default database PostgreSQL listening port (only needed when
PostgreSQL is used)
Allows the HPDM Server to talk to the
Master Repository Controller to manage the Master Repository
HPDM Gateway ports
Table B-5 HPDM Gateway ports (inbound)
Receiver port
Sender Receiver
67
69
4011
40000
40003
PXE Client (thin client side)
PXE Client (thin client side)
PXE Client (thin client side)
HPDM Server
HPDM Agent
HPDM Server
HPDM Agent
HPDM PXE Server
(bundled with HPDM
Gateway)
HPDM PXE Server
(bundled with HPDM
Gateway)
Proxy DHCP Service
(third-party software)
HPDM Gateway
HPDM Gateway
40008 HPDM Gateway HPDM Gateway
Controller
Protocol Purpose
UDP PXE bootstrap
UDP
UDP
UDP
TCP
TCP
TFTP (Trivial File Transfer Protocol)
Proxy DHCP Service (an alternative to port 67 if port 67 is not available)
Allows the HPDM Server and HPDM
Agent to poll the HPDM Gateway
Allows the HPDM Server to send tasks to the HPDM Gateway
Allows the HPDM Agent to send reports to the HPDM Gateway
Allows the HPDM Gateway to notify the
HPDM Gateway Controller there are other gateways running in the same subnet
Table B-6 HPDM Gateway ports (outbound)
Receiver port
Sender Receiver
20 & 21 HPDM Gateway FTP server (third-party software)
Protocol
TCP
Purpose
These are the default ports for FTP (used for repositories). Port 20 is for data transfer and port 21 is for listening to commands. FTP ports can be configured via the HPDM Console. If you do not use the default ports for your FTP server,
HPDM Gateway ports 87
Table B-6 HPDM Gateway ports (outbound) (continued)
Receiver port
Sender Receiver
22
68
137
138
139
445
989 & 990
40001
40001
40005
40008
50000
HPDM Gateway
HPDM PXE Server
(bundled with HPDM
Gateway)
HPDM Gateway
HPDM Gateway
HPDM Gateway
HPDM Gateway
HPDM Gateway
HPDM Gateway
HPDM Gateway
HPDM Gateway
HPDM Gateway
HPDM Gateway
Protocol Purpose
SFTP server (third-party software)
TCP please configure the firewall appropriately.
This is the default port for SFTP (used for repositories). SFTP ports can be configured via the HPDM Console. If you do not use the default port for your SFTP, please configure the firewall appropriately.
PXE bootstrap HPDM Imaging Mini
Linux Tool (client-side)
UDP
NetBIOS Name Service UDP
NetBIOS Datagram
Service
UDP
NetBIOS Session
Service
Microsoft Directory
Services
TCP
TCP
FTPS server (third-party software)
HPDM Agent
HPDM Agent
HPDM Server
HPDM Gateway
Controller
PCoIP zero clients
Allows NetBIOS Name Resolution
Allows NetBIOS Datagram transmission and reception
Allows NetBIOS Session Services connections
For File and Printer Sharing to allow
Server Message Block transmission and reception through Named Pipes
TCP
TCP
UDP
These are the default ports for FTPS
(used for repositories). Port 989 is for data transfer and port 990 is for listening to commands. FTPS ports can be configured via the HPDM Console. If you do not use the default ports for your FTPS server, please configure the firewall appropriately.
Allows the HPDM Gateway to send tasks to the HPDM Agent
Allows the HPDM Agent to receive replies of broadcasting from the HPDM Gateway
TCP
TCP
(loopback)
TCP
Allows the HPDM Gateway to send reports to the HPDM Server
Allows the HPDM Gateway to notify the
HPDM Gateway Controller there are other gateways running in the same subnet
Allows the HPDM Gateway to send tasks to PCoIP zero clients
HPDM Agent ports
Table B-7 HPDM Agent ports (inbound)
Receiver port
Sender Receiver
68 DHCP Server HPDM Agent
Protocol Purpose
UDP Receive replies for DHCP options
88 Appendix B Port reference
Table B-7 HPDM Agent ports (inbound) (continued)
Receiver port
Sender Receiver
68
5500
5900
40001
40001
40004
Protocol Purpose
HPDM PXE Server
(bundled with HPDM
Gateway)
Windows platform : VNC
Server (client-side)
SSL VNC Proxy
(bundled with HPDM
Console)
HPDM Gateway
HPDM Imaging Mini
Linux Tool (client-side)
Windows platform : SSL
VNC Proxy (bundled with HPDM Agent)
VNC Server (client-side) TCP
(loopback)
HPDM Agent
UDP
TCP
(loopback)
TCP
HPDM Gateway
SSL VNC Proxy
(bundled with HPDM
Console)
HPDM Agent
SSL VNC Proxy
(bundled with HPDM
Agent)
UDP
TCP
PXE bootstrap
SSL VNC Proxy in Listen Mode (reverse
VNC)
VNC Shadow
Allows the HPDM Gateway to send tasks to the HPDM Agent
Allows the HPDM Agent to receive replies of broadcasting from the HPDM Gateway
VNC SSL Proxy in Listen Mode on the
HPDM Agent
Table B-8 HPDM Agent ports (outbound)
Receiver port
Sender Receiver
20 & 21 HPDM Agent FTP server (third-party software)
Protocol
TCP
22
67
HPDM Agent SFTP server (third-party software)
TCP
UDP
Purpose
These are the default ports for FTP (used for repositories). Port 20 is for data transfer and port 21 is for listening to commands. FTP ports can be configured via the HPDM Console. If you do not use the default ports for your FTP server, please configure the firewall appropriately.
This is the default port for SFTP (used for repositories). SFTP ports can be configured via the HPDM Console. If you do not use the default port for your SFTP, please configure the firewall appropriately.
PXE bootstrap
67
PXE client (client-side)
HPDM Agent
HPDM PXE server
(bundled with HPDM
Gateway)
DHCP server UDP
69
Allows the HPDM Agent to send DHCP option requests
TFTP (Trivial File Transfer Protocol)
137
138
PXE client (client-side)
HPDM Agent
HPDM Agent
HPDM PXE server
(bundled with HPDM
Gateway)
UDP
NetBIOS Name Service UDP
NetBIOS Datagram
Service
UDP
Allows NetBIOS Name Resolution
Allows NetBIOS Datagram transmission and reception
HPDM Agent ports 89
Table B-8 HPDM Agent ports (outbound) (continued)
Receiver port
Sender Receiver
139 HPDM Agent
445
5500
5900
989 & 990
HPDM Agent
Windows platform: VNC
Server (client-side)
SSL VNC Viewer
(bundled with HPDM
Console)
HPDM Console FTPS server (third-party software)
Protocol
TCP
Purpose
NetBIOS Session
Service
Microsoft Directory
Services
TCP
TCP
Windows platform : SSL
VNC Proxy (bundled with HPDM Agent)
TCP
(loopback)
VNC Proxy (client-side) TCP
(loopback)
Allows NetBIOS Session Services connections
For File and Printer Sharing to allow
Server Message Block transmission and reception through Named Pipes
SSL VNC Viewer in Listen Mode (reverse
VNC)
VNC Shadow
4011
40000
40003
40004
40009
PXE client (client-side)
HPDM Agent
HPDM Agent
Windows: SSL VNC
Proxy (bundled with
HPDM Agent); HP
ThinPro: X11VNC
(bundled with platform)
HPDM Agent
Proxy DHCP service
(third-party software)
HPDM Gateway
HPDM Gateway
SSL VNC Proxy
(bundled with HPDM
Console)
HPDM Server
UDP
UDP
TCP
TCP
TCP
These are the default ports for FTPS
(used for repositories). Port 989 is for data transfer and port 990 is for listening to commands. FTPS ports can be configured via the HPDM Console. If you do not use the default ports for your FTPS server, please configure the firewall appropriately.
Proxy DHCP service (an alternative to port 67 if port 67 is not available)
Allows the HPDM Agent to poll the HPDM
Gateway
Allows the HPDM Agent to send reports to the HPDM Gateway
SSL VNC Proxy in Listen Mode (reverse
VNC)
Allows the HPDM Agent to send resource information (CPU, RAM, disk I/O, network
I/O, processes, etc.) to the HPDM Server.
The HPDM Server will send a stop process command to the HPDM Agent.
Repository ports
Table B-9 Repository ports (inbound)
Receiver port
Sender Receiver
20 & 21 HPDM Console
HPDM Gateway
HPDM Agent
Master Repository
Controller
FTP server (third-party software)
Protocol
TCP
Purpose
These are the default ports for FTP (used for repositories). Port 20 is for data transfer and port 21 is for listening to commands. FTP ports can be configured via the HPDM Console. If you do not use the default ports for your FTP server,
90 Appendix B Port reference
Table B-9 Repository ports (inbound) (continued)
Receiver port
Sender
22
137
138
139
445
989 & 990
40012
HPDM Console
HPDM Gateway
HPDM Agent
Master Repository
Controller
HPDM Console
HPDM Gateway
HPDM Agent
Master Repository
Controller
HPDM Console
HPDM Gateway
HPDM Agent
Master Repository
Controller
HPDM Console
HPDM Gateway
HPDM Agent
Master Repository
Controller
HPDM Console
HPDM Gateway
HPDM Agent
Master Repository
Controller
HPDM Console
HPDM Gateway
HPDM Agent
Master Repository
Controller
HPDM Server
Receiver
SFTP server (third-party software)
NetBIOS Name Service UDP
NetBIOS Datagram
Service
NetBIOS Session
Service
Microsoft Directory
Services
FTPS server (third-party software)
TCP
Master Repository
Controller
Protocol Purpose
TCP
UDP
TCP
TCP
TCP please configure the firewall appropriately.
This is the default port for SFTP (used for repositories). SFTP ports can be configured via the HPDM Console. If you do not use the default port for your SFTP, please configure the firewall appropriately.
For File and Printer Sharing to allow
NetBIOS Name Resolution
For File and Printer Sharing to allow
NetBIOS Datagram transmission and reception
For File and Printer Sharing to allow
NetBIOS Session Service connections
For File and Printer Sharing to allow
Server Message Block transmission and reception through Named Pipes
These are the default ports for FTPS
(used for repositories). Port 989 is for data transfer and port 990 is for listening to commands. FTPS ports can be configured via the HPDM Console. If you do not use the default ports for your
FTPS server, please configure the firewall appropriately.
Allows the HPDM Server to talk to the
Master Repository Controller to manage the Master Repository (this port is for the
Master Repository only)
Repository ports 91
Table B-10 Repository ports (outbound)
Receiver port
Sender Receiver
20 & 21 Master Repository
Controller
FTP server (third-party software)
Protocol
TCP
22 Master Repository
Controller
137
138
139
445
Master Repository
Controller
Master Repository
Controller
Master Repository
Controller
Master Repository
Controller
989 & 990 Master Repository
Controller
SFTP server (third-party software)
TCP
NetBIOS Name Service UDP
NetBIOS Datagram
Service
UDP
NetBIOS Session
Service
Microsoft Directory
Services
TCP
TCP
FTPS server (third-party software)
TCP
Purpose
These are the default ports for FTP (used for repositories). Port 20 is for data transfer and port 21 is for listening to commands. FTP ports can be configured via the HPDM Console. If you do not use the default ports for your FTP server, please configure the firewall appropriately.
This is the default port for SFTP (used for repositories). SFTP ports can be configured via the HPDM Console. If you do not use the default port for your SFTP, please configure the firewall appropriately.
For File and Printer Sharing to allow
NetBIOS Name Resolution.
For File and Printer Sharing to allow
NetBIOS Datagram transmission and reception.
For File and Printer Sharing to allow
NetBIOS Session Service connections.
For File and Printer Sharing to allow
Server Message Block transmission and reception through Named Pipes.
These are the default ports for FTPS
(used for repositories). Port 989 is for data transfer and port 990 is for listening to commands. FTPS ports can be configured via the HPDM Console. If you do not use the default ports for your
FTPS server, please configure the firewall appropriately.
92 Appendix B Port reference
