2.2.1
Installation
Install Authentication Server
An Authentication Server must be installed on the network before the IIS 6 Module is installed. See
2.1
Requirements
for compatible servers and 3.5
for configuration recommendations.
Warning
If the users are Active Directory users on a Windows platform, it is recommended that the Use
Windows User Name Resolution feature on the Authentication Server is enabled. This uses
Windows functions to identify User IDs as Windows User accounts, including the domain to which the account belongs.
This feature is not available on Linux platforms or the aXs GUARD Identifier.
If the Use Windows User Name Resolution feature is disabled, it is essential that users always use the same login name. If they try to log in using a different form of their Windows account name, their login will be rejected, unless a second Digipass User account has been created.
2.2.2
2.2.3
2.2.4
IIS
Ensure IIS and the Citrix Web Interface are installed and working correctly. The Citrix Web Interface must be installed on the IIS server where the web server is running.
Information Needed
Before you begin installation of the IIS 6 Module, ensure that you have the following information easily accessible, as you will need to enter this during the installation.
IP address and port number of the Authentication Server. To check this, open the Authentication Server
Configuration and check the Component location and Port fields.
Source IP address on the local machine to use when connecting to the Authentication Server (if multiple IP addresses are configured for this machine, as this affects licensing – see below).
Licensing
The Authentication Server will regard each incoming IP address as a different Client Component. This is the reason for selecting a single IP address in connecting to the Authentication Server if there is more than one IP address for a machine.
Digipass Authentication for Citrix Web Interface Guide 13
