2.4
Digipass Authentication for Citrix Web Interface Wizard
Installation
Note
For a definition of the term Authentication Server, please see 1.1.3 IIS Module Terminology
1.
Enter the IP address for the Authentication Server in the IP Address field.
2.
Check the Port field. If the SEAL port on which the primary Authentication Server is listening is not the default provided (20003), enter the correct port number.
3.
Select the type of data store that the primary Authentication Server is using. Select either Active Directory or
ODBC-compliant or embedded database . If using the embedded PostgreSQL database, select ODBCcompliant or embedded database .
4.
Click
Next
.
The Wizard will attempt to connect to the Authentication Server using the IP address and port provided.
Digipass Authentication for Citrix Web Interface Guide 19
Installation
If the connection fails an error window will appear informing you of the problem. Click
OK
to take you back to the Authentication Server Connection Details window. To get help identifying the problem, see the
5
Troubleshooting section.
5.
Select an IP address from the IP Address drop down list, which will contain IP addresses assigned to the current machine. The IIS 6 Module will use the selected IP address exclusively. As VASCO component licensing operates on IP address, this ensures that the IIS 6 Module will only use up one component license slot.
6.
Click Next .
Digipass Authentication for Citrix Web Interface Guide 20
Installation
7.
Select one of the two option buttons.
Create Component record manually
The Wizard will not attempt to create a Component record for the IIS 6 Module or load a license for the record. You will need to do this manually instead. This option where a Component record already exists for the IIS 6 Module, with a valid license key loaded.
a.
Select
Do not create the Component record and do not load the license automatically
b.
Click on Next.
c.
Jump to Step 10.
Create Component record automatically
The Wizard will create a Component record in the Authentication Server data store for the IIS 6 Module. You may also load a license for the created record. If the Component record already exists for the IIS 6 Module at the current IP address, a new Component record will not be created. The license key will be loaded into the existing Component record.
a.
Select Do create the Component record automatically
b.
Click on
Next.
c.
Continue with the following steps.
8.
Enter your login details:
Active Directory
Digipass Authentication for Citrix Web Interface Guide 21
Installation a.
Enter the User ID and password for the Domain Administrator.
If you are logged into the current machine as Domain Administrator in the correct Domain, you may leave these fields blank.
b.
Enter the Fully Qualified Domain Name of the Domain in which the Authentication Server configuration data is kept. Typically this will be Digipass Configuration Domain . This is a mandatory field.
c.
Enter a preferred server if you wish the Wizard to connect to a specific Domain Controller. The text entered should be the first part of the Fully Qualified Domain Name for the Domain Controller.
d.
Click on Next.
Digipass Authentication for Citrix Web Interface Guide 22
ODBC-Compliant Database
Installation a.
Enter the User ID and password for an Administrator account on the Authentication Server. This account will need permissions to: view, create and update Components view Policies
b.
Click on Next.
Digipass Authentication for Citrix Web Interface Guide 23
Installation
9.
To load a license key:
Select a license key file by clicking ... Select the license.dat
file to load from where you saved it on your machine. Click Open to load the License Key from the file.
If you do not already have a license.dat file containing a License Key for the Citrix Web Interface
Component at this Location, click on the Request a License Key from www.vasco.com
.
button. This will take you to the vasco.com web site, where you can request a license key and save it to a file called license.dat.
To load a license key later, simply click on Next.
10.
The Summary screen will allow you to review your configuration settings before they are applied.
Check the configuration settings carefully and click Back to go back and change a setting if it is incorrect.
Click Proceed to apply the configuration settings when they are correct.
11.
If the Authentication Server uses Active Directory as its data store, you may need to restart the
Authentication Server before it will recognise the new Component record and acknowledge requests from the IIS 6 Module.
Digipass Authentication for Citrix Web Interface Guide 24
