Configuration
3.1.2.2
2.
Enter a name for the Authentication Server in the Display Name field.
This name will be used to distinguish the Authentication Server in the Server list, but has no effect on the behaviour of the IIS 6 Module.
3.
Enter an IP address and port (typically 20003) for the Authentication Server, in the IP Address and Port fields.
4.
Select a Server Type (see
1.1.2
Server Connection Management ).
5.
Enter a timeout period (in seconds) in the Timeout field.
6.
Enter the maximum number of concurrent connections to be made from the IIS 6 Module to the Server, in the
Max. Connections field.
7.
Enter a minimum and maximum amount of time that the IIS 6 Module should wait before attempting to reconnect to the Authentication Server in the Min. Reconnect Interval and Max. Reconnect Interval fields.
8.
Click on the
OK button.
Modify Server Details
1.
Select the Server to be edited.
2.
Click on the Edit button.
The Edit Server window will be displayed.
Digipass Authentication for Citrix Web Interface Guide 27
