Configuration
Digipass Assignment Mode
Either Self-Assignment or Auto-Assignment would typically be used in this scenario, although manual assignment may also be used.
Local Authentication
The typical setting for local authentication would be Digipass/Password, meaning that Users usually need to use an
OTP when logging in, but are not required to in some circumstances (eg. in Grace Period).
Non-Windows User accounts
The following settings are recommended for this scenario:
Back-End Authentication
Back-End Authentication:
None
The Authentication Server will not use back-end authentication.
Digipass User Account Handling
Dynamic User Registration: Disabled
Password Autolearn: Disabled
Stored Password Proxy: Disabled
As these settings are used with Windows back-end authentication, they will not be used.
Digipass Assignment Mode
As Self-Assignment and Auto-Assignment are both reliant on back-end authentication,only manual assignment will be available.
Local Authentication
The typical setting for local authentication would be Digipass, meaning that Users are required to use an OTP when logging in
3.5.3.2
1-Step Challenge/Response
If you use 1-Step Challenge/Response, you will need these Policy settings:
1-Step Challenge/Response Permitted: Yes – Server Challenge
Challenge Length as required
Add Check Digit as required
Digipass Authentication for Citrix Web Interface Guide 54
Challenge Check Mode:
0
For more information, see the Policies section of the Product Guide.
Configuration
Digipass Authentication for Citrix Web Interface Guide 55
