LCS-8031G3_Manual

Use this adapter as an AP

1. To use this adapter as an AP (access point), select the “AP” mode and click the “Next” button to proceed.

2. Select “Normal User” (recommend) to make an step-by-step configuration. You may also select “Advanced Users” to configure this AP with more detail.

29

3. Assign an SSID for this AP, which is the name that is going to be identified while other wireless devices scan for available network. Choose to use WEP encryption or not from the drop list and click “Next” to proceed.

4. Click the “Next” button after confirming those settings above.

30

5. Click “Finish” to complete setup.

31