Connecting to a Stereo VCR or DVD Recorder (optional). Gemtek Technology MXF-S981116N, AT&T U-verse ISB7005

Connecting to a Stereo VCR or DVD Recorder (optional)

2-23-11 Draft

The diagram below shows how to connect a recording device to your receiver. Although it is possible to watch TV using a connection through your VCR or DVD recorder to the TV, this connection may not provide the best picture, and HDTV users are restricted to an SD format. In addition, some content is copy protected and passing this content through the recording device may result in a picture that cannot be viewed.

For these reasons, the connection shown is best used to provide only video and audio to your recording device and not for normal TV viewing. The connection from the recording device to the TV (only used for playback of recorded material) depends on the type of device being used, the outputs that are supported, and the inputs that remain available for use on your TV.

Consult the owner’s manuals provided with your TV and recording device for more details on connection options.

Cables Used in this Confi guration

• 1 RCA-type Video Cable

• 1 Set Audio Left/Right Cables

WARNING:

Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the receiver.

Connecting your TV directly to the Audio/Video output of your receiver will assure a more vivid picture and enhance your viewing enjoyment.

Receiver

TO TV

(VIDEO OUT)

NETWORK

Pb Y L R

Pr

S-VIDEO

VIDEO

OUT

AUDIO

OUT

OPTICAL USB POWER

L R

VIDEO

IN

AUDIO

IN

Back of Stereo VCR or DVD Recorder

CABLE IN/

ANT IN

L R

VIDEO

OUT

AUDIO

OUT

CABLE OUT/

ANT OUT

T14831

23