Control Functions
Basic Operations 1
27
DELAY
- Press this button to begin the process for setting the delay times used LR-6500 when processing surround sound or to compensate for video-to-audio delays caused by the use of digital sources or video displays.
SET UP
- Enter or exit the system setup menu. (DVD only)
28
ENTER
Press to enter setting.
29
DIGITAL
- Press this button to assign one of the digital inputs to a source
MENU
- Access the menu on a DVD disc. (DVD only)
30
OSD
- Press this button to activate the ON-Screen
Display(OSD) system used to set up.
- Select to NTSC or PAL (press this button for more than
3 seconds).
31
VOL (^/v)
Press to adjust volume.
32
MUTE
Press to activate the mute function.
3
SOURCE
STANDBY/ON
SELECT
MENU ENTER
VOLUME
DIGITAL
1 Press the STANDBY/ON button.
2
Select a source by pressing the SOURCE (5/b) button
repeatedly.
DVD
CD
TUNER
TAPE
7.1 CH DIRECT IN
VIDEO 1
VIDEO 2
AUX 1
3
Press DIGITAL button and press the 5orb button
repeatedly to select one of the digital inputs or the analog input for any source.
or
1. Press the MENU button on the front panel.
2. Each time the SELECT(5orb) button is pressed until
"DIGITAL INPUT" displayed on the front panel.
3. Press the ENTER button.
4. Each time the SELECT(5orb) button is pressed to select you desired input.
4
Play the source, and gradually turn up the volume to the required level with the VOLUME control.
- 16 -
Basic Operations 2
STANDBY/ON
SOURCE
SELECT
A
VOLUME
B
MUTE
C
VOLUME B
D SURROUND MODE
GROUP SELECTOR
MENU ENTER
SURROUND MODE
SELECTOR
E
A
SOURCE (6/n )
Press to select input sources.
G
TONE
ENTER
SLEEP F
B
VOLUME knob
To control the overall listening level, turn the MASTER VOL-
UME knob or press the VOLUME buttons (+/–) on the remote control unit.
F Sleep Timer Function
This function allows you to preprogram the receiver to switch its own power off automatically. You can then enjoy the audio/video system for a specified amount of time without having to worry about turning the unit off later.
Each press of the SLEEP button changes the time indication by 10 minutes.
C
MUTE
To mute the sound temporarily, press the MUTE button.
Press the MUTE button again to restore the sound. If you change the volume during the muting, the muting will be canceled.
While muting is engaged, the MUTE indicator will flicker.
To let the remaining time (until power off) appear on the display while the sleep timer is engaged, press the SLEEP button once.
D
Surround Mode Group Selector
Press this button to select the top-level group of surround modes.
Each press of the button will select the current or last used mode in each of the surround mode groups.
E Surround Mode Selector
Press this button to select from among the available surround mode options for the mode group selected.
G TONE Control
1
Press the TONE button or press the MENU button and
ENTER button on the front panel in serial order.
"TONE IN" appears on the front panel's display.
2
Press the ENTER button.
"BASS ADJUST" appears on display.
3
Press the 5/b button to select "BASS ADJUST" or "TRE-
BLE ADJUST" or press the SELECT(n/6) button and press the ENTER button on the front panel.
• To adjust the level of low frequency sound range, select
"BASS ADJUST".
• To adjust the level of high frequency sound range, select
"TREBLE ADJUST"
4
Press the 5/b buttons of remote control unit or the
SELECT(n/6) button to change the setting. The level can be adjusted in 1 dB steps from -10 to +10.
- 17 -
